|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 19, 2000, 04:32 PM | #1 |
Senior Member
Join Date: November 17, 2000
Location: Pittsburgh
Posts: 127
|
I mistakenly bought Black Powder ammo for CAS (and I bought a heck of a lot!) But now that I've shot it, I think it's kinda neat.
My question is, should I vary the way I clean my guns (Marlin 1894 CB II, and Ruger Vis-Baq's). I cleaned them with CLP, Powder-Blast, then Rem-Oil; this is my usual method. But someone told me (this scares me) that soapy warm water works great on black powder. I really hesitate to try this. Especially since my Rugers are finished with the Case-Hardened look. Thanks in advance, Dave |
December 19, 2000, 07:31 PM | #2 |
Staff Alumnus
Join Date: October 15, 1998
Location: Roswell,GA
Posts: 433
|
Howdy,
Warm soapy water is a good way to clean up BP fouling. Also, some folks use vinegar (NOT ammonia) based Windex. Around here, Ballistol is quite popular for cleaning guns, and it does a number on BP fouling. Whatever you choose, don't let your guns sit after shooting BP-clean them as soon as possible after shooting them. None of the above will harm the finish on your guns. Bellicose Bill |
December 21, 2000, 08:24 AM | #3 |
Member
Join Date: November 7, 2000
Posts: 89
|
Liten to Bill. He knows of what he speaks.
|
April 14, 2002, 10:32 PM | #4 |
Junior member
Join Date: April 13, 2002
Location: Seattle
Posts: 92
|
I recommend that you disassmemble the guns and use hot soapy water for cleaning. Then use a natural lubricant like TC's Borebutter(TM) to season the shooting irons.
You do not want to use any petroleum based oils as they will cause excessive fouling. Use the Borebutter or go with Ballistol for BP guns. |
April 15, 2002, 07:40 AM | #5 |
Senior Member
Join Date: January 29, 2000
Location: Wa
Posts: 922
|
When I get back from the range, I dissasemble my revolvers and then head to the sink, were I proceed to scrub the parts clean. After that I blow off any excess water with my air hose.
Then back to the bench to clean the bore and lube um. Tony |
April 15, 2002, 10:55 AM | #6 |
Senior Member
Join Date: March 8, 2000
Location: MA
Posts: 177
|
Hot soapy water, the hotter the better. If you get the metal hot enough, it will actually cause excess water to evaporate. Some cap n ball shooters actually clean their guns, without grips, in the dishwasher. Those would be the shooters with very understanding wives . My dishwasher doesn't get hot enough in the drying cycle to work. I use Windex at the range, and the hot water method at home. This is only with cap n ball, however. For the limited BP cartridge I have shot, I used a mixture of 1/3 Murphys, 1/3 Hydrogen Peroxide and 1/3 water.
|
April 16, 2002, 10:27 PM | #7 |
Junior member
Join Date: December 26, 2001
Posts: 673
|
Ballistol
> > BALLISTOL dissolves traces of lead, copper, zinc, brass and tombac, which are used to make projectiles and jackets for them. Residues of these metals will remain in the bore of any firearms as a result of shooting jacketed or unjacketed lead projectiles. The use of BALLISTOL makes scraping or brushing the bore unnecessary. Just pour or spray enough into the barrel and chamber, turn the firearm around several times to allow the liquid to reach all parts and let it "go to work". Later, the residues will then completely be cleaned out. Due to its alkaline character BALLISTOL is ideal for cleaning and maintaining black powder firearms. BALLISTOL eliminates the need for brutal mechanical scrubbing and aggressive solvents. Of course, you should also use BALLISTOL to treat your holsters, belts and carrying slings. > > |
June 20, 2002, 12:16 PM | #8 |
Member
Join Date: July 10, 2001
Location: Oxford Mills,Ontario
Posts: 23
|
I use Windex w. vinegar,followed by Ed's Red.
|
June 20, 2002, 02:10 PM | #9 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,419
|
No matter what you do, you HAVE to use some sort of solvent that contains a good deal of water -- hot soapy water, Simple Green, Windex, etc.
It's the water component that dissolves the corrosive elements in the fouling. Oil does not touch this stuff (it's very similar chemically to table salt), only water.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
June 24, 2002, 12:43 PM | #10 |
Senior Member
Join Date: December 6, 2001
Location: texas
Posts: 260
|
I use warm-to-hot slightly soapy water. Follow with a rinse of boiling water. (be careful) Hand dry gun and then place in an oven that was heated to 150 F and then turned off for about 15 minutes or so.
Note I do not leave oven on at 150 F when gun is in there, just heat it up to 150 and turn off. Just opening it to place gun in probably drops temp. in there by 5-10 F. |
June 26, 2002, 08:48 AM | #11 |
Member
Join Date: May 19, 2002
Posts: 99
|
I haven't used water/water-based cleaners in my BP guns since Shooters Choice introduced their BP Gel. A petroleum-based cleaner it sticks to a cleaning patch and doesn't make a mess of things. I have an aversion to putting water to gun metal unless absolutely necessary. The BP Gel works wonders and cuts through fouling like nobody's business. Give it a try. You'll fall in love with it. Definitely worth the asking price, which by the way, is quite reasonable.
dfm |
|
|