Guns you wish existed.

Brutus · December 13, 2019, 08:55 PM

I would really like a Colt 1908 in 9mm with a decocker, boy that would really make my Sam Spade day.
Here's looking at you kid.

mk70ss · December 13, 2019, 09:06 PM

A revolver the same size as a Colt Detective Special, in blued steel, in an 8 shot .22 magnum version.

Brutus · December 13, 2019, 09:20 PM

I'd be happy if they just brought back the Colt Detective Special.

105kw · December 13, 2019, 09:26 PM

I would love to see a Colt New Service, old style like 1930s models.
Throw in a retro target version.

Onward Allusion · December 13, 2019, 09:55 PM

10 shot revolver in 327 Federal Magnum.

Nodak1858 · December 13, 2019, 11:07 PM

A modern, plastic, double stacked mag, striker fired pistol in 7.62x25.

ms6852 · December 13, 2019, 11:48 PM

I wish I had bought the 12/22 revolver by USFA. Loved the look of this revolver but was always moving around overseas for years and by the time I was going to get US firearms was no longer around. I forgot I would love a Mateba 6 Unica semi-auto revolver in .357.

Cheapshooter · December 14, 2019, 02:39 AM

A reasonably priced DA/SA 22 rimfire revolver.
i.e. Rock Island Armory 200/206 in 22 rimfire.

rmocarsky · December 14, 2019, 04:04 AM

A Beretta 92 in .45 ACP.

Rmocarsky

Hal · December 14, 2019, 05:54 AM

I wished for a K frame S&W sized .44 magnum snub nose & *poof* it was granted!
It matters little that the K frame is an L frame - the grip is the same.

So - moral of the story is - all you wishers keep wishing & some day it may come true for you!

TruthTellers · December 14, 2019, 06:08 AM

Ruger Mark in .32 ACP

Ruger Model 44 carbine, but in .327, .357, .44, and .45 Colt with two full length tubular magazines similar to the KSG. It's just a semi automatic rifle that holds 15 rounds of rimmed revolver ammo tickles my fancy.

Ben Dover · December 14, 2019, 07:11 AM

Modern PCC in 7.62X25 Tokarev, with 75 round drum.

Polymer frame 1911 double stack in 9X25 Dillon.

CZ P07 in 7.62X25 Tokarev.

PSP · December 14, 2019, 08:29 AM

An HK model the size of a Kahr P9. In other words, a Kahr that works without a doubt. While we're at it, add a optic slide cut to the slide aka the Hellcat. My dream HK.

USNRet93 · December 14, 2019, 08:57 AM

A Glock the same size as a Glock 19 but less expensive and chambered in 22LR
...........oh wait a minute

**OldMarksman** · December 14, 2019, 10:56 AM

Quote:

I'd be happy if they just brought back the Colt Detective Special.

They have.

Since detectives do not customarily carry revolvers these days, they call it a Cobra, but it is all steel.

big al hunter · December 14, 2019, 11:13 AM

I would love a large frame revolver chambered in something along the lines of a 500 S&W necked down to .44 caliber. And maybe one necked down to .357, so I can compare and pick the one that makes me smile the most.

jetinteriorguy · December 14, 2019, 02:34 PM

A 3" GP100 that holds 7 rounds of .327 mag. That would be my new carry gun for sure.

DMK · December 14, 2019, 04:24 PM

6 shot 327 Magnum 2" barrel stainless steel frame S&W Bodyguard (shrouded hammer) J-frame. A Centennial in same configuration would also be acceptable.

JDBerg · December 14, 2019, 04:57 PM

FN should start producing the Browning Hi Power again. The line to buy one forms behind me!

Tactical Jackalope · December 14, 2019, 04:59 PM

HK P30L striker-fired.

Don't you dare say "VP9"!

Bartholomew Roberts · December 14, 2019, 05:07 PM

A double-stack 9mm 1911 with a 4” barrel and reliable magazines at less than $1,000.

J.G. Terry · December 14, 2019, 06:28 PM

How about an accurately reproduced version of the Smith&Wesson Triple Lock revolver in 44 Special. That revolver after a reintroduction of the Smith&Wesson N frame 38/44 Outdoorsman.

327 FM · December 14, 2019, 09:31 PM

Ruger GP100 in 45colt

peterg7 · December 14, 2019, 10:02 PM

KGP141 in .45acp

Sent from my iPhone using Tapatalk

10-96 · December 14, 2019, 10:42 PM

I would like to see a modern Colt 1877 replica- but redesigned in the guts to prevent breakage and short life.

December 13, 2019, 08:55 PM	#1
Brutus Senior Member Join Date: September 11, 2005 Posts: 1,023	Guns you wish existed. I would really like a Colt 1908 in 9mm with a decocker, boy that would really make my Sam Spade day. Here's looking at you kid. __________________ Courage is what it takes to stand up and speak out, Courage is also what it takes to sit down and listen, Winston Churchill.

December 13, 2019, 09:06 PM	#2
mk70ss Senior Member Join Date: January 12, 2008 Location: Tennessee Posts: 1,642	A revolver the same size as a Colt Detective Special, in blued steel, in an 8 shot .22 magnum version. __________________ Say when.....

December 13, 2019, 09:20 PM	#3
Brutus Senior Member Join Date: September 11, 2005 Posts: 1,023	I'd be happy if they just brought back the Colt Detective Special. __________________ Courage is what it takes to stand up and speak out, Courage is also what it takes to sit down and listen, Winston Churchill.

December 13, 2019, 09:55 PM	#5
Onward Allusion Senior Member Join Date: November 17, 2009 Location: Back in a Non-Free State Posts: 3,133	10 shot revolver in 327 Federal Magnum. __________________ Simple as ABC . . . Always Be Carrying

December 13, 2019, 11:07 PM	#6
Nodak1858 Senior Member Join Date: September 7, 2009 Location: N. Dakota Posts: 446	A modern, plastic, double stacked mag, striker fired pistol in 7.62x25. __________________ We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.

December 13, 2019, 09:26 PM	#4
105kw Senior Member Join Date: June 30, 2017 Location: Columbia Basin Washington Posts: 516	I would love to see a Colt New Service, old style like 1930s models. Throw in a retro target version.

December 13, 2019, 11:48 PM	#7
ms6852 Senior Member Join Date: April 4, 2010 Location: Texas Posts: 1,394	I wish I had bought the 12/22 revolver by USFA. Loved the look of this revolver but was always moving around overseas for years and by the time I was going to get US firearms was no longer around. I forgot I would love a Mateba 6 Unica semi-auto revolver in .357. Last edited by ms6852; December 14, 2019 at 03:51 AM.

December 14, 2019, 02:39 AM	#8
Cheapshooter Senior Member Join Date: December 2, 2007 Location: Missouri Posts: 8,306	A reasonably priced DA/SA 22 rimfire revolver. i.e. Rock Island Armory 200/206 in 22 rimfire.

December 14, 2019, 04:04 AM	#9
rmocarsky Senior Member Join Date: February 27, 2009 Posts: 406	A Beretta 92 in .45 ACP. Rmocarsky

December 14, 2019, 05:54 AM	#10
Hal Senior Member Join Date: October 10, 1998 Location: Ohio USA Posts: 8,564	I wished for a K frame S&W sized .44 magnum snub nose & poof it was granted! It matters little that the K frame is an L frame - the grip is the same. So - moral of the story is - all you wishers keep wishing & some day it may come true for you!

December 14, 2019, 06:08 AM	#11
TruthTellers Senior Member Join Date: October 22, 2016 Posts: 3,962	Ruger Mark in .32 ACP Ruger Model 44 carbine, but in .327, .357, .44, and .45 Colt with two full length tubular magazines similar to the KSG. It's just a semi automatic rifle that holds 15 rounds of rimmed revolver ammo tickles my fancy. __________________ "We always think there's gonna be more time... then it runs out."

December 14, 2019, 07:11 AM	#12
Ben Dover Senior Member Join Date: April 11, 2013 Location: High up in the Rocky Moun Posts: 665	Modern PCC in 7.62X25 Tokarev, with 75 round drum. Polymer frame 1911 double stack in 9X25 Dillon. CZ P07 in 7.62X25 Tokarev.

December 14, 2019, 08:29 AM	#13
PSP Senior Member Join Date: June 2, 2006 Location: Bowling Green Virginia Posts: 4,496	An HK model the size of a Kahr P9. In other words, a Kahr that works without a doubt. While we're at it, add a optic slide cut to the slide aka the Hellcat. My dream HK.

December 14, 2019, 08:57 AM	#14
USNRet93 Senior Member Join Date: October 23, 2018 Location: Republic of Boulder, USA Posts: 1,475	A Glock the same size as a Glock 19 but less expensive and chambered in 22LR ...........oh wait a minute

December 14, 2019, 11:13 AM	#16
big al hunter Senior Member Join Date: March 12, 2011 Location: Washington state Posts: 1,558	I would love a large frame revolver chambered in something along the lines of a 500 S&W necked down to .44 caliber. And maybe one necked down to .357, so I can compare and pick the one that makes me smile the most. __________________ You can't fix stupid....however ignorance can be cured through education!

December 14, 2019, 02:34 PM	#17
jetinteriorguy Senior Member Join Date: April 28, 2013 Posts: 3,476	A 3" GP100 that holds 7 rounds of .327 mag. That would be my new carry gun for sure.

December 14, 2019, 04:24 PM	#18
DMK Senior Member Join Date: November 18, 2001 Location: Over the hills and far, far away Posts: 3,211	6 shot 327 Magnum 2" barrel stainless steel frame S&W Bodyguard (shrouded hammer) J-frame. A Centennial in same configuration would also be acceptable. __________________ - Homeland Security begins at home: Support your Second Amendment - www.gunowners.org - www.saf.org - act.nraila.org - www.grnc.org

December 14, 2019, 04:57 PM	#19
JDBerg Senior Member Join Date: May 18, 2015 Location: PA Posts: 1,835	FN should start producing the Browning Hi Power again. The line to buy one forms behind me! __________________ Words to Live By: Before You Pray - Believe; Before You Speak - Listen; Before You Spend - Earn; Before You Write - Think; Before You Quit - Try; Before You Die - Live

December 14, 2019, 04:59 PM	#20
Tactical Jackalope Senior Member Join Date: December 5, 2010 Location: Miami, Florida Posts: 6,462	HK P30L striker-fired. Don't you dare say "VP9"!

December 14, 2019, 05:07 PM	#21
Bartholomew Roberts member Join Date: June 13, 2000 Location: Texas and Oklahoma area Posts: 8,462	A double-stack 9mm 1911 with a 4” barrel and reliable magazines at less than $1,000.

December 14, 2019, 06:28 PM	#22
J.G. Terry Senior Member Join Date: January 24, 2014 Posts: 577	How about an accurately reproduced version of the Smith&Wesson Triple Lock revolver in 44 Special. That revolver after a reintroduction of the Smith&Wesson N frame 38/44 Outdoorsman. __________________ Intentionally Antagonizing Another MemberInsults and Ad Hominems

December 14, 2019, 09:31 PM	#23
327 FM Member Join Date: July 3, 2012 Posts: 89	Ruger GP100 in 45colt

December 14, 2019, 10:02 PM	#24
peterg7 Senior Member Join Date: July 20, 2017 Posts: 316	KGP141 in .45acp Sent from my iPhone using Tapatalk

December 14, 2019, 10:42 PM	#25
10-96 Senior Member Join Date: October 19, 2005 Location: Tx Panhandle Territory Posts: 4,190	I would like to see a modern Colt 1877 replica- but redesigned in the guts to prevent breakage and short life. __________________ Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search