The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools Search this Thread
Old October 23, 2009, 09:41 PM   #1
dabigguns357
Senior Member
 
Join Date: May 3, 2008
Location: Ona,West Virginia
Posts: 1,215
AR-10 vs AR-15

I was looking into buying a AR style rifle and looked to the dpms panther in both the 308 and 223.

I have never owned either but i have shot a 223,other than that i know little to nothing about either.Btw the reason i want one is just that,i want one. I'll eventually reload for it as well as my 357 sig.

Remember it's a want.
dabigguns357 is offline  
Old October 23, 2009, 09:52 PM   #2
Skyyr
Senior Member
 
Join Date: May 4, 2009
Posts: 266
Between the two, the AR-15 is going to win in most every category, except in sheer firepower and effective range - those go to the AR-10.

The only problem with the AR-10 is that there's no standardized AR rifle in .308 caliber. In fact, the AR-10 is specifically an Armalite rifle (point being that you can't just walk into a gun store and ask them for an AR-10 like you can an AR-15 - if they don't have an Armalite model in, they'll tell you they don't have any, even if the wall is lined with DPMS models). The parts on .308 AR's are (for the most part) NOT, repeat NOT, interchangeable. AR-15 parts, on the other hand, can be swapped out with each other like Legos (with a few exceptions). In addition, the lack of a standardized .308 AR means that it hasn't been tested or perfected like the AR-15 has, causing them to inherently have more reliability and failure issues.

I've owned a few AR's and I currently have a Noveske AR-15. I plan on purchasing a .308 AR soon, but I'm glad I went with an AR-15 first, as it's more reliable and lets you learn the AR weapon system more efficiently.

I'd suggest getting an AR-15 first and then, once you've learned it, learned what you like/dislike about it, and are comfortable with it, get a .308 caliber AR. It'll save you alot of time and money doing so.
__________________
"The underlying theory of gun control is the assumption that people can be perfect without God."

Last edited by Skyyr; October 24, 2009 at 12:48 AM.
Skyyr is offline  
Old October 23, 2009, 10:04 PM   #3
tincanhunter
Member
 
Join Date: July 3, 2009
Posts: 94
Not to mention AR15 uppers are available in several different calibers http://www.accuracysystemsinc.com/ar15_conversion.php to get an idea. Two others that weren't shown on the website are 458 SOCOM and the 50 Beowulf. Swap out the upper and magazine (depending) and shoot a different caliber .
tincanhunter is offline  
Old October 23, 2009, 10:09 PM   #4
javven
Senior Member
 
Join Date: October 23, 2009
Posts: 195
I have heard some Colt components may not lego to other AR-15s. I have no first hand experience with this - all my ARs have been non-Colt (though Colt makes arguably the best)

The AR-15 wins hands down in everyy category for the casual shooter. Better parts availability, very good ammunition selection, the AR15 lower can fit a very -wide- variety of upper calibers (9mm, 22lr, 7.62x39 to name just a few) and offers a huge selection of furniture, rails, triggers... list goes on.

And... finally the standard A2 works great right out of the box The AR-10 does, too but the 15 is easier for more people to shoot well IMO
javven is offline  
Old October 23, 2009, 11:51 PM   #5
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
Oh, do not listen to Skyyr, he makes too much sense. The AR 10 is an awesome weapon and can not be compared to the 223. Except how he did it.

I have an AR 15, and would want an AR 10 after having shot one...
Edward429451 is offline  
Old October 24, 2009, 12:25 AM   #6
Quentin2
Senior Member
 
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,996
I like both but so far only have an AR-15. Though I'd love to have an ArmaLite AR-10B I doubt that I will since the AR-15/M4 makes more sense for me, it's the right size and .223/5.56 is much cheaper than .308. (But like you say, you'll reload).

If it's a matter of one or the other, be sure to choose the caliber you have the most use for. And if you ever think you want an AR for medium size game then the .308 is for you.
Quentin2 is offline  
Old October 24, 2009, 03:55 AM   #7
zombieslayer
Senior Member
 
Join Date: September 11, 2009
Location: Florida
Posts: 3,198
Never shot an AR-10, but the ones I've held at shows are deceptively heavy. That said, I do prefer the power of .308.
zombieslayer is offline  
Old October 24, 2009, 04:05 AM   #8
BusGunner007
Senior Member
 
Join Date: December 14, 2001
Location: Upper Left Coast
Posts: 2,116
.223 AR15 first.
Opens up a lot of possibilities.

.308 Remington 700 LTR later.
Portable, pricision power shooter.
__________________
"...if you're not havin' fun, you're workin'..."
BusGunner007 is offline  
Old October 24, 2009, 06:42 AM   #9
MTT TL
Senior Member
 
Join Date: October 21, 2009
Location: Quadling Country
Posts: 2,780
I have both and will say that if you reload, the cost difference in the ammo is not as noticeable.

Each has it's own purpose and you need to think about what you want the rifle to do for you before you buy. The AR-10 makes a great hunting rifle for just about every kind of medium to large game. The AR-15 is more of a gopher getter because many states still have laws prohibiting the .223 for deer :barf:. You could put a different upper on it but by the time you do that you could just buy the AR-10 instead.

DPMS makes very good quality rifles for a good price. My AR-10 style rifle came from them. I would say customer satisfaction is probably around 98%.
MTT TL is offline  
Old October 24, 2009, 06:59 AM   #10
blume357
Senior Member
 
Join Date: August 2, 2005
Location: Greenville, SC
Posts: 3,943
When I went to my clubs rifle range yesterday,

a guy was shooting an AR 10... all I can say is there is a world of difference standing under a covered firing line about 30 ft from a guy shooting .308 as compared to .223.

I usually shoot 22lr and man that AR10 is a cannon. Then again as I was packing up a guy showed up and started sighting in his bolt action 306.... I'm used to folks shooting all around me but every time that damn rifle went off I jumped.

I can't imagine doing a lot of shooting or target practice with a 308.
blume357 is offline  
Old October 24, 2009, 08:16 AM   #11
velocette
Senior Member
 
Join Date: May 25, 2007
Location: South Florida
Posts: 924
I've had a DPMS LR 308B for three years. I ordered it from DPMS with 18" cryo bull barrel, adjustable gas block, JP trigger & Hogue grip. It is and has been totally reliable when fed decent ammo. Accuracy is excellent, averaging just under 1 MOA and better with 168 SMKs. Recoil is quite moderate. My normal range session is 50 ~ 75 rds, rarely more, occasionally less. No bruising or pain after the day.
The only suggestion I have on ANY AR style rifle, is to upgrade the trigger, either when you order it or immediately upon receipt. The stock triggers are HORRID, creepy, heavy & gritty.
The rifle is heavy, just over 11 lb with a 4 ~ 16 scope.
Overall, I am very pleased with the rifle & would not change the specs if I were to do it again.

Roger
__________________
Trigger control + Breath control + Sight alignment = Gun Control.
http://www.hrpclub.info/
NRA Smallbore Prone Master, High Power Master
velocette is offline  
Old October 24, 2009, 08:16 AM   #12
168 grain
Member
 
Join Date: October 9, 2008
Posts: 34
My opinion......I've handled both with the AR15 being both long and short barrels and for the .308 not an actual AR-10 (Armalite) but a DPMS LR308 with an 16" barrel. Yes a little more kick but .308 power. I wouldn't suggest trying to whip aroud a 24" bull barrel AR10 on a tactical shooting course, but depending on what you want it for it does several things well. I wanted it for a hunting, tactical, and short to medium distance range shooting. It does all three.....well.
168 grain is offline  
Old October 24, 2009, 08:32 AM   #13
rshanneck2002
Senior Member
 
Join Date: December 14, 2008
Posts: 194
I own a DPMS AP4 with a 16 in barrell and a bushmaster in 5.56, dosnt compare in the firepower dept. I have to take them to the range at different times because after firing the AP,well the 556 feels like a toy. The .308 is about a lb heavier but holds groups very well. Only drawback is .308 is alot more expsensive to purchase in bulk, but .223 aint as cheap as it was used to be either.
rshanneck2002 is offline  
Old October 24, 2009, 08:36 AM   #14
rshanneck2002
Senior Member
 
Join Date: December 14, 2008
Posts: 194
Im now looking at the new Kel-Tec bullpup in .308 but i will wait a see a few reviews of this new rifle? and the price drops alittle, looks very interesting?
rshanneck2002 is offline  
Old October 24, 2009, 12:00 PM   #15
harabas
Junior Member
 
Join Date: October 21, 2009
Location: Las Vegas, NV
Posts: 3
I just bought the DPMS in .243 with the 20" heavy barrel. I chose the .243 because it has better stopping power and long range accuracy than the .223 and much less recoil than the .308. First 3 rounds after sighting in were 3/4". Very happy with this choice so far, but the rifle does weigh 12 pounds with scope and bipod.
harabas is offline  
Old October 24, 2009, 04:12 PM   #16
Alleykat
Junior member
 
Join Date: July 26, 2007
Posts: 3,668
javven:
Quote:
I have heard some Colt components may not lego to other AR-15s. I have no first hand experience with this - all my ARs have been non-Colt (though Colt makes arguably the best)
Yeah, you'd get a lot of arguments about that absurd statement! Key information: "I have no first hand(sic) experience with this....."
Alleykat is offline  
Old October 25, 2009, 12:37 AM   #17
Quentin2
Senior Member
 
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,996
Quote:
Yeah, you'd get a lot of arguments about that absurd statement! Key information: "I have no first hand(sic) experience with this....."
I'm sure he's talking about the non-standard lowers Colt made for a while, trying to be sure that no M16 parts could be dropped in. Unfortunately that also prevented many third party AR-15 trigger upgrades as well. Even the takedown pin wasn't standard. Colt finally realized their mistake and got back out of the ditch.
Quentin2 is offline  
Old October 25, 2009, 12:49 AM   #18
blhseawa
Senior Member
 
Join Date: January 16, 2008
Location: Des Moines, WA
Posts: 220
Not enough information ...

To actually answer your question, you really haven't explained for what purpose or how you plan to use the weapon. This makes it hard to advise you either way.

If you are looking for urban SHTF protect your family, then the AR14 M4 4 or 6 position stock with 14.5 or 16 inch barrel with 1:7 twist, with the right dot sight will probably be a good choice Note: others may argue, but on a AR15 with with less than 20" inch barrel I would not recommend using M193 class ammo!

If you go AR15 with 20" barrel typical Service Rifle competition than the .223 is probably a great rifle.

If you are looking for more fire-power then one of the .308 rifles may be a good choice, however, I would caution against getting a AR in 308 that has a barrel less than 18" in length. As others have already mentioned, .308 ARs (Armlite AR-10, DMPS LR-308, RRA LAR-8, POF-USA P-308) are all different with different parts and are not interchangeable.

I'm going to mention something else for you to consider: If the urban defense weapon sounds interesting to you, I would like to suggest something else for your consideration, and that is either a different upper and mags or as complete rifle. TFL already knows IMHO what i think of short barreled AR-15, so will set that aside for the moment. However, if you want real stopping power, aren't worried about over penetration, think apartment complex, then I would suggest you look at a AR-15 in 6.8 SPC, this cartridge was designed to function well in a 14.5 to 16 inch barrel and has better terminal and barrier ballistics. The real cool thing, is other that bolt, barrel and magazine it uses standard AR15 parts.

A couple of comments to consider: 1) AR-15 platform is available is more than just .223 cartridge, AR-15 allows for interchanging upper and lower receivers, my brother has two AR-15 lowers, one with a A2 fixed stock, and one with M4 6-position collapsible stock, M4 16" 5.56mm upper receiver, M4 14.5 inch 6.8 SPC upper and NM A2 upper. With these five units he mixes and matches to suit his needs. He is talking about getting a A4 upper in .243 for deer hunting. 2) I would spend some time thinking about how you will actual use the rifle and do some research both here and at the Ar-15.com web site to refine your choice/decision. 3) I agree with those who say you should start with AR-15 first.

My last comment is I take exception about Bushmaster rifles not being good quality that has never been my experience, however I never bought an assembled AR-15 in my life, and even uppers I bought were tore down and reassembled by me. I am a engineer, machinist and gunsmith, so the only person who does work on my weapons, is me, my self I, hey it is crowed in here. But with the AR-15 platform, the cost of the right tools is not cheap or for everyone, some will say all you need is wrench, but don't believe them, gauges, holding fixtures, disassembly blocks, pin punches, hammers, etc all cost if you don't possess them. And head spacing is not a simple job, and requires the right tools. Thus if you are looking for great quality already assembled weapons, than choosing the right manufacturer or supplier is important, if you are like me, then the quality of the parts is more important than the name, and I know how to verify the quality of parts

YMMV
__________________
Buy and hold is my method of gun ownership!
blhseawa is offline  
Old October 25, 2009, 03:18 AM   #19
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,887
blume357:
As for the sound of the .308, it grabs your attention driving by your club range with closed windows and a guy demonstrates his G-3 to family members with ten or so rounds of fairly rapid fire. One has no doubt that rounds that size are designed for deadly combat.
If Russian etc .308 ammo were available for what Wolf .223/7.62x39 costs, an AR-10, G-3 or M-1A1 would be in my house.

If ever in a hostile situation, might the .308 sound alone keep an aggressor's head down for a while, compared to .223?

Last edited by Ignition Override; October 25, 2009 at 03:30 AM.
Ignition Override is offline  
Old October 25, 2009, 08:10 AM   #20
Palmetto-Pride
Senior Member
 
Join Date: May 31, 2009
Location: Charleston, SC
Posts: 2,071
I was in your position awhile ago. I wanted a AR-10 or 15 I didn't really care for 5.56/223 I thought it was to small, debated back and forth between .308 AR-10 or 5.56/223 AR-15. I decided after listing to advice to first get an AR-15 5.56/223 and I must say that I am glad I did because it has been a blast to shoot. It has helped me learn the AR platform and in the future I will get a AR-10 .308, but for now I am having fun with my AR-15.
__________________
“The problem with socialism is that you eventually run out of other people's money.”

-Margaret Thatcher-
Palmetto-Pride is offline  
Old October 25, 2009, 08:45 AM   #21
lmccrock
Senior Member
 
Join Date: April 23, 2007
Location: Red Rock. TX
Posts: 820
For fun (a "want"), not shooting a lot, a 308 AR is great. More shooting, AR15 is good because you can also get a 22LR upper/mags and it is cheap to shoot.

Quote:
I can't imagine doing a lot of shooting or target practice with a 308.
First, it is not as bad if you are behind the shooter, or you are the shooter. Second, some AR rifles (whatever caliber) have a compensator which directs gases to the sides, improving felt recoil, but making the experience less pleasant for bystanders. Regardless, have good hearing protection, even if you are shooting "just" a 22.

Quote:
He is talking about getting a A4 upper in .243 for deer hunting.
Careful.... a "243 Winchester" upper will not go onto an AR-15 lower, and requires a 308 lower. The right "243 WSSM" upper will go onto an AR15 lower.

Lee
lmccrock is offline  
Old October 25, 2009, 08:49 AM   #22
blhseawa
Senior Member
 
Join Date: January 16, 2008
Location: Des Moines, WA
Posts: 220
To Imcrock ...

Thanks, I'll tell him.

learned something new!
__________________
Buy and hold is my method of gun ownership!
blhseawa is offline  
Old October 25, 2009, 09:40 AM   #23
LateNightFlight
Senior Member
 
Join Date: November 22, 2007
Location: Central Missouri
Posts: 552
The simple answer: Get an AR15 first - cheaper to shoot - see how you like it. (You'll probably come to love it... lots of fun, reliable, accurate; you'll become part of an army of fans.)

Then, get an AR10.

But realize there's a chance you'll add another AR15 first, in order to satisfy a desire to have another one with a different configuration. I've come to appreciate that 'AR15' describes a stripped lower that can become just about anything from that point, forward.
LateNightFlight is offline  
Old October 25, 2009, 10:03 AM   #24
MTT TL
Senior Member
 
Join Date: October 21, 2009
Location: Quadling Country
Posts: 2,780
He does not really need a .243 upper. There are lots of cartridges not based on the .308 that are good for deer hunting. The upper comes in the following options that are good for deer hunting:


300 Whisper / .300Fireball / 300-.221
6.5 x 40
.30 Coyote (30 x 45)
6.8 SPC
30 HRT
338 Spectre
10 mm Mag
35/40
7.62 x 40
7.62 x 39
.338 x 39
6 PPC
6.5 Grendel / 6.5 AR / 6.5 PPC Improved
30 Carbine (marginal)
7 BR
6.5 BR
300 Sabre
458 SOCOM
44 Mag
440 CorBon
44 AMP
.475 Tremor
50AE
499LW
50 Beowulf
10mm (marginal)
and .243 WSSM

But if you want a .308 based cartridge you need the AR-10.
MTT TL is offline  
Old October 25, 2009, 10:10 AM   #25
LateNightFlight
Senior Member
 
Join Date: November 22, 2007
Location: Central Missouri
Posts: 552
Quote:
Careful.... a "243 Winchester" upper will not go onto an AR-15 lower, and requires a 308 lower. The right "243 WSSM" upper will go onto an AR15 lower.
The value of reading TFL shines again! I recently began considering a .243 carbine AR set up with an adjustable stock as a possibility for something my petite girlfriend could use for deer, but wouldn't be some kind of youth rifle with no other use. I was thinking about an upper swap onto an AR I already have. The beauty of going the AR route is that the adjustable stock would make the gun useful to other adult shooters, including myself, with more potential of purpose.

When adjusted, my AR carbine fits her beautifully and she doesn’t look or act like she’s trying to steady 50 pounds of something.

I hadn't considered this closely enough to realize it would be a WSSM, so a sincere thanks for the mention of this.
LateNightFlight is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11999 seconds with 7 queries