May 10, 2015, 04:45 PM | #1 |
Senior Member
Join Date: April 5, 2015
Posts: 171
|
8208XBR in 308
Got a can of 8208, will be using it with Berger 168 VLD bullets. I have never used it before, are there any suggestions on a load. Am using Lapua brass and Federal 210M primers.
|
May 10, 2015, 04:50 PM | #2 |
Senior Member
Join Date: April 5, 2015
Posts: 171
|
All of my cases are trimmed to 2.007 and I double weigh every load.
|
May 10, 2015, 07:35 PM | #3 |
Senior Member
Join Date: February 7, 2012
Posts: 299
|
Just out of idle curiosity, what are you planning to shoot your new load out of?
A lot of folks really like 8208xbr. |
May 11, 2015, 06:37 AM | #4 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Suggestion: do a normal load workup.
The 8208XBR and Berger 168 is a good combination, but it is impossible to say what will be best in your rifle. Jimro |
May 11, 2015, 04:02 PM | #5 |
Senior Member
Join Date: April 5, 2015
Posts: 171
|
I shoot a Rem 700 with a 26" Hart barrel and a Timney trigger
|
May 12, 2015, 07:01 AM | #6 |
Senior Member
Join Date: November 21, 2013
Location: New Hampshire
Posts: 1,695
|
I tried XBR in my 308 and didn't have great success in my R700 Varmint. It worked ok, but nothing worth keeping. I only worked XBR with 155 SMK's maybe you will find better success with the 168's. I'm having much greater success with XBR in my Bushmaster Varmint AR using 77gr SMK's . This seems to be a great combination.
__________________
"To be old an wise you must have been young and stupid" |
|
|