|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 7, 2002, 11:53 AM | #1 |
Senior Member
Join Date: March 25, 1999
Location: KS
Posts: 1,558
|
SP101 won't cock on single action
Took my SP apart for a cleaning this morning. Put it all back together now I can't cock the hammer with my thumb for single action.
Double action works just fine, pull the trigger and everything moves as it should. Watching everything work, it appears as though the cylinder latch isn't moving down far enough to release the cylinder, but why would it work double action and not single? Since it was new this gun has been stiff when handcocking, hanging up now & then. |
September 10, 2002, 07:22 AM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,874
|
My first (thoughtless) response...
not assembled correctly? Disassemble, reassemble, test.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 10, 2002, 08:31 PM | #3 |
Senior Member
Join Date: March 25, 1999
Location: KS
Posts: 1,558
|
Did that several times, everythings where it should be. Took it back to the dealer, he's a Davidsons distributor, should have a new one by this weekend.
Actually, since initially buying an SP, this will be the fourth time it's been returned and replaced with a new one. Own several Rugers, never had a problem with any of the others. |
September 11, 2002, 01:14 PM | #4 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,874
|
Trigger group. Betcha anything something slipped out of place and was reassembled with it out of place.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 11, 2002, 08:05 PM | #5 |
Senior Member
Join Date: March 25, 1999
Location: KS
Posts: 1,558
|
Didn't take the trigger group apart. With the exception of the transfer bar.
|
|
|