The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old January 20, 2002, 12:09 PM   #1
Junior Member
Join Date: January 8, 2002
Location: Out in the west among the the Rockies
Posts: 3
Does any one know...

To all
A bit of background: The pre- 1964 model 94 Wichester has a removeable lower tang s/n 2,500,00 to 4,840,000-. They also a flat trigger spring On the post 1964 the same model with s /n's above 4,850,000 have a coiled trigger springand a removeable lower tang.Okay, have you got that?
My problem is that I have a model 94 s/n3,xxx,xxx and I want to upgrade it to a coiled trigger spring by putting a newer lower tang on it. Does ANY BODY KNOW FOR SURE if the lower tang froma s/n of 4,580,000 or higher will fit on a lower s/n model? Dont tell me to contact Winchester,I did .All I got out of a smart a====== was a diatribe of why did I want to do it .

Thanks for any support
tbc [email protected]
thebullretcaster is offline  
Old January 21, 2002, 08:27 AM   #2
George Stringer
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Right off the top of my head I don't know. There may be more involved than just the dimensions. You might contact Brownells tech support staff If they know they'll certainly give you an answer. George
George Stringer is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04708 seconds with 7 queries