|July 12, 2013, 11:43 PM||#1|
Join Date: July 12, 2013
I have a 94 in 357. on the first round after loading the rifle it cycles normally, but after that when the lever is cycled the round goes up but a second cartridge comes out of the magazine falling into the action. The retaining clip seems fine. is there anything else it could be.
|July 13, 2013, 12:49 PM||#3|
Join Date: April 27, 2007
You can (maybe) save yourself a lot of heartache by taking it to a smith who knows Winchester 94s.
First, it's most likely, statistically speaking, that Hawg Haggen is right.
I had the same thing happen with a newly purchased (online) Win '94 .44magnum and it was not because of a worn cartridge stop.
Thinking it was, I spent a lot of time and some money acquiring a new lever link (with, of course, new cartridge stop) then spent some aggravation installing it.
Then, when that didn't work, I took it to a smith (over 200 miles away) that was a "winchester-approved" shop. Six months and $200+ dollars later, it finally works.
I wish I'd started with the smith in the first place.
Upside, I now have an extra lever link in case I ever need it.
P.S.: You might get more play with this by posting in the Smithy section.
Show me the data
|Thread Tools||Search this Thread|