The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old April 9, 2013, 03:49 PM   #1
jimaw2
Member
 
Join Date: October 2, 2008
Location: n california
Posts: 83
rossi m92 problem

I posted this in rifle section with no response. I just purchased a rossi m92 trapper in .357. after 50 or so trouble free rounds the action locked up after firing. I found that if I pressed in on the loading gate it unlocked the action. I thought I found the problem when I noticed the screw behind the gate was loose, but no. it "seems" it is more likely to happen with a full or close to full magazine. when it locks up you can see the loading gate is almost flush with the receiver. any ideas? thanks..........
jimaw2 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03312 seconds with 9 queries