Where to get parts 0r service for a winchester 50 cal. Apex inline ?

HOGSHOOTER · March 9, 2013, 02:18 PM

So whats a guy to do when winchester can`t help with parts or service.Only tells you i do not know when you call them tried all the parts sellers no luck. this rifle very tight grouping at 200 meters hate to turn it into a wall hanger. Again its a Winchester APEX 50 CAL INLINE.HOGSHOOTER

mega twin · March 10, 2013, 09:49 AM

Is yours made in Spain?
I have one that is,and it appears to be the same as CVA,but haven't had any issues,so have not needed parts.
Just a guess,good luck!

FrontierGander · March 10, 2013, 03:03 PM

call or email CVA, They built the rifles. Whats the problem you're having?

HOGSHOOTER · March 11, 2013, 06:07 PM

Trigger houseing and the pin that holds it on slowing being wallowed out. my load is 125gr TRIPLE 7 so im not loading to hot for it.Been shot around 65 to 70 times with barnes spitfire t mz.two others i hunt with have one and they load 150 gr of triple 7 and shot them 150 to 200 times with no wear.maybe i got a bad one? And yes it was made in spain. HOGSHOOTER

HOGSHOOTER · March 12, 2013, 03:56 PM

CVA APEX not the same as the WINCHESTER APEX mine a fixed barrel rifle with a trapdoor type action you pull down on rear trigger guard that drops open action hammer and all to expose breechplug fot priming and cleaning .Parts may interchange Sounds like one maker copy off the other.CVA you push on the front of trigger guard to prime rifle clean,or change barrel.Still trying to get a hold of CVA to check.HOGSHOOTER

FrontierGander · March 12, 2013, 06:49 PM

cva apex is a switch barrek break action.

Winchester Apex/cva kodiac are the same guns. Both are made by cva

HOGSHOOTER · March 13, 2013, 02:57 PM

You are right the KODIAK is the same rifle.now to get them to make it right with another Maker name on it.Had same probelm before with A CVA rifle. HOGSHOOTER

March 9, 2013, 02:18 PM	#1
HOGSHOOTER Member Join Date: February 7, 2012 Posts: 44	Where to get parts 0r service for a winchester 50 cal. Apex inline ? So whats a guy to do when winchester can`t help with parts or service.Only tells you i do not know when you call them tried all the parts sellers no luck. this rifle very tight grouping at 200 meters hate to turn it into a wall hanger. Again its a Winchester APEX 50 CAL INLINE.HOGSHOOTER

March 10, 2013, 03:03 PM	#3
FrontierGander Senior Member Join Date: January 30, 2009 Location: Boncarbo,Colorado Posts: 651	call or email CVA, They built the rifles. Whats the problem you're having? __________________ https://buckskinsbp.blogspot.com/

March 12, 2013, 06:49 PM	#6
FrontierGander Senior Member Join Date: January 30, 2009 Location: Boncarbo,Colorado Posts: 651	cva apex is a switch barrek break action. Winchester Apex/cva kodiac are the same guns. Both are made by cva __________________ https://buckskinsbp.blogspot.com/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 10, 2013, 09:49 AM	#2
mega twin Senior Member Join Date: August 15, 2006 Posts: 434	Is yours made in Spain? I have one that is,and it appears to be the same as CVA,but haven't had any issues,so have not needed parts. Just a guess,good luck!

March 11, 2013, 06:07 PM	#4
HOGSHOOTER Member Join Date: February 7, 2012 Posts: 44	Trigger houseing and the pin that holds it on slowing being wallowed out. my load is 125gr TRIPLE 7 so im not loading to hot for it.Been shot around 65 to 70 times with barnes spitfire t mz.two others i hunt with have one and they load 150 gr of triple 7 and shot them 150 to 200 times with no wear.maybe i got a bad one? And yes it was made in spain. HOGSHOOTER

March 12, 2013, 03:56 PM	#5
HOGSHOOTER Member Join Date: February 7, 2012 Posts: 44	CVA APEX not the same as the WINCHESTER APEX mine a fixed barrel rifle with a trapdoor type action you pull down on rear trigger guard that drops open action hammer and all to expose breechplug fot priming and cleaning .Parts may interchange Sounds like one maker copy off the other.CVA you push on the front of trigger guard to prime rifle clean,or change barrel.Still trying to get a hold of CVA to check.HOGSHOOTER

March 13, 2013, 02:57 PM	#7
HOGSHOOTER Member Join Date: February 7, 2012 Posts: 44	You are right the KODIAK is the same rifle.now to get them to make it right with another Maker name on it.Had same probelm before with A CVA rifle. HOGSHOOTER