The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old February 2, 2013, 09:28 PM   #1
Junior Member
Join Date: August 6, 2010
Posts: 9
9 mm recipe question

anybody have recipe for 9mm 115 grian lead round nose using bulleye i have two manuals neither have a recipe thanks
dstiltz is offline  
Old February 2, 2013, 10:01 PM   #2
Senior Member
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 1,021
You can use the load for 115gr jacketed bullets which Alliant publishes, which is 4.7gr. Or if you download the Alliant 2004 manual you will see a load published for 125gr Lead, which is 4.9gr. Both these recipes illustrate a reloading principle, first that you can use jacketed data when reloading lead bullets of the same weight and secondly that using load data for a heavier bullet is acceptable for a lighter bullet as well. Perhaps not for H110, but thats a different story.

These loads are max, so if you use them reduce 10% as a starting point.
New gun, same ol' shot.
Adamantium is offline  
Old February 3, 2013, 12:08 AM   #3
Senior Member
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 281
The powder manufacturer is your friend. See
j357 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05135 seconds with 9 queries