The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Thread Tools Search this Thread
Old January 11, 2013, 08:12 PM   #1
Senior Member
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 1,503
What to look for in a Norinco SKS

Found one locally at a fair price. What issues if any am I to look for? Thanks.
baddarryl is offline  
Old January 11, 2013, 08:33 PM   #2
Junior Member
Join Date: December 15, 2012
Posts: 1
I don't know a whole lot about the Chinese ones, but one thing to look for is the bolt/firing pin. If the firing pin is corroded bad enough to stick in fire position, it'll go full auto on ya. Not a common problem, but I saw it once. A friend of mine brought his out to the range to fire it for the first time and inadvertently emptied the magazine. Fortunately he had the presence of mind to keep it pointed downrange til it stopped. Imagine if he dropped it and ran like a little girl!

Of course the range employees were quite excited for a while there, and asked us to vacate the premises forthwith.

But, I still think the SKS is a great rifle for the money.
HKopp is offline  
Old January 11, 2013, 08:35 PM   #3
Senior Member
Join Date: December 5, 2009
Location: Frisco Texas
Posts: 802
Check the bore

Check the trigger action and safety

(See if the hammer releases, just by bumping, on an empty chamber of course

Check to see if the firing pin rattles back and forth (if there isnt a spring loaded pin)
An imperfect servant of my Lord and Saviour, Jesus

Buying American made, wherever I still can
dean1818 is offline  
Old January 11, 2013, 08:39 PM   #4
Senior Member
Join Date: November 6, 2010
Location: west central Illinois
Posts: 277
I've done the conversion. My SKS is a much safer gun.
1Hobie is offline  
Old January 11, 2013, 09:53 PM   #5
Join Date: October 12, 2012
Posts: 99
Matching numbers is a plus. So is having the bayonet and cleaning kit included. If not included, use that as a bargaining chip if you're the haggling type.

I own 5 SKSs. For each one I had to rid the bolt/firing pin of cosmoline. Like dean said, shake the bolt, see if the firing pin rattles. If it doesn't, chances are it's caked with gunk. You need to disassemble the bolt and wipe everything down. Or, you can leave the bolt assembled and take a hair dryer to it, which melts away all the cosmo. I prefer the latter method. Works like a charm.

Also, never apply oil to the firing pin.
Proverb for Paranoids: The innocence of the Creatures is in inverse proportion to the immorality of the Master. -T. Pynchon
Unspoken is offline  
Old January 13, 2013, 03:04 AM   #6
Senior Member
Join Date: October 22, 2010
Posts: 449
The sks survivors boards are helpful. Matching #s #1 firing pin is a easy fix with a springloaded murrays firing pin. Start buying up some stripper clips cause there going fast.
I'm hairbag and I approve this message.
Hairbag is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07079 seconds with 9 queries