Who works on Service Six Triggers?

Z400ACDC · January 10, 2013, 10:48 AM

My like new 4'' SS Service Six could use a better trigger. Who could I send it to for this work? THANKS!

Zhillsauditor · January 10, 2013, 12:16 PM

My local guy does them, as will most local gunsmiths--rugers have been around for a long time.

My only ruger, a single ten, was pretty stiff, so I installed a wolff spring kit, and it is much better, although probably not up to a good trigger job. Main thing for me was the hammer spring was so strong, I got tired of cocking it. The new spring solved that issue.

Z400ACDC · January 10, 2013, 01:24 PM

Anyone have a link where I can find out how to take it apart and PUT it back again?

Zhillsauditor · January 10, 2013, 03:48 PM

EDIT: Oops, I read single where it said service. Apologies. See next response for better vids.

Here's the offical ruger video:
http://youtu.be/UfOXBa8K8Ow

and reassembly:

http://youtu.be/3zEKDqwkgEs

Note that this is part of the basic field stip according to Ruger(!).

Dan-O · January 10, 2013, 04:02 PM

Since the Service Six is a double action revolver, this may be more helpful:

http://youtu.be/kkyRDM7md9A

And reassembly:

http://youtu.be/OiWkxSgi4IA

There are specific vids that show how to do the Service/Speed 6. Just do a search on YouTube. Here is a link to the manual that gives instructions:

https://ruger-docs.s3.amazonaws.com/...ecuritySix.pdf

Here's a vid that is for the Service 6:
http://youtu.be/96lc7XGZIxE

Z400ACDC · January 10, 2013, 05:46 PM

Thanks! I may give it a try. I have tuned a few rifle triggers and a MKiii.

January 10, 2013, 10:48 AM	#1
Z400ACDC Senior Member Join Date: January 18, 2006 Location: Bowling Green,KY Posts: 433	Who works on Service Six Triggers? My like new 4'' SS Service Six could use a better trigger. Who could I send it to for this work? THANKS! __________________ Bowling Green, KY

January 10, 2013, 01:24 PM	#3
Z400ACDC Senior Member Join Date: January 18, 2006 Location: Bowling Green,KY Posts: 433	Anyone have a link where I can find out how to take it apart and PUT it back again? __________________ Bowling Green, KY

January 10, 2013, 03:48 PM	#4
Zhillsauditor Senior Member Join Date: October 19, 2008 Posts: 635	EDIT: Oops, I read single where it said service. Apologies. See next response for better vids. Here's the offical ruger video: http://youtu.be/UfOXBa8K8Ow and reassembly: http://youtu.be/3zEKDqwkgEs Note that this is part of the basic field stip according to Ruger(!). Last edited by Zhillsauditor; January 10, 2013 at 06:17 PM.

January 10, 2013, 04:02 PM	#5
Dan-O Senior Member Join Date: August 3, 2011 Location: Northern Colorado Posts: 969	Since the Service Six is a double action revolver, this may be more helpful: http://youtu.be/kkyRDM7md9A And reassembly: http://youtu.be/OiWkxSgi4IA There are specific vids that show how to do the Service/Speed 6. Just do a search on YouTube. Here is a link to the manual that gives instructions: https://ruger-docs.s3.amazonaws.com/...ecuritySix.pdf Here's a vid that is for the Service 6: http://youtu.be/96lc7XGZIxE Last edited by Dan-O; January 10, 2013 at 04:17 PM.

January 10, 2013, 05:46 PM	#6
Z400ACDC Senior Member Join Date: January 18, 2006 Location: Bowling Green,KY Posts: 433	Thanks! I may give it a try. I have tuned a few rifle triggers and a MKiii. __________________ Bowling Green, KY

January 10, 2013, 12:16 PM	#2
Zhillsauditor Senior Member Join Date: October 19, 2008 Posts: 635	My local guy does them, as will most local gunsmiths--rugers have been around for a long time. My only ruger, a single ten, was pretty stiff, so I installed a wolff spring kit, and it is much better, although probably not up to a good trigger job. Main thing for me was the hammer spring was so strong, I got tired of cocking it. The new spring solved that issue.