|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 27, 2012, 04:47 AM | #1 |
Junior Member
Join Date: November 17, 2012
Posts: 2
|
Marlin 795 magazine disconnect question
I'm new to the forums so I apologize if this post is in the wrong place.
Lately I've been having some issues removing the magazine from my Marlin 795. When i inspected both magazines after my last range trip, i noticed that the magazine disconnect had worn a notch in the metal and was getting hung up, making it nearly impossible to remove the magazine. Does anyone know a good solution for this? I've read about people modifying or removing the magazine disconnect but I'm very reluctant to do either seeing as it was designed as a safety feature and it will also void the warranty. Thanks |
November 27, 2012, 04:52 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,247
|
Sounds like it's time for a new magazine latch.
http://www.midwayusa.com/product/951...795-795ss-7000 15 bucks and 15 minutes with a screwdriver should fix it.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
November 27, 2012, 08:59 PM | #3 |
Junior Member
Join Date: November 17, 2012
Posts: 2
|
The magazine release seems to be working just fine. It's the magazine disconnect safety that keeps getting hung up on the magazine. There's a small metal tab that contacts the magazine near the top and it keeps getting stuck on the magazine.
|
Tags |
.22lr , 795 , marlin |
Thread Tools | Search this Thread |
|
|