The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old November 17, 2012, 11:44 AM   #1
Join Date: March 9, 2011
Location: Arkansas
Posts: 22
.30 carbine 100 gr bullets

Hello all I came across some realy cheep bullets 400 for $20 from a guy at work that got them in some reloading equipment at an auction could someone look up the Speer load data for the .30 carbine 100 gr short jacket bullets for me as I do not have a Speer book ( need to get one) Thanks in advance for any help.
NRFJR is offline  
Old November 18, 2012, 10:41 AM   #2
Senior Member
Join Date: January 22, 2005
Location: Kentucky
Posts: 2,432
Speer #11 manual, lists the following for their 100 gr "plinker". Cases were WW, Primers used were CCI-400, Rifle was "M1 Carbine" make not stated.

IMR 4227, 13.5 to 15.5 gr for velocities from 1627 to 1883 fps.

2400, 10.5 to 12.5 gr for velocities from 1526 to 1817 fps.

H110, 12.5 to 14.5 gr for Velocities from 1678 to 1951.

I've had my best accuracy for three US M1 Carbines with 4227 at 14.5 gr.

As always, you should find and abide by a good manual, current in publication.
The above loads were fine in my guns, but yours may and probably do differ as to quality, and safety.
Work up slowly.

Best Regards, Rod
Cherish our flag, honor it, defend what it stands for or get the hell out. Our Freedoms are not free, they've been paid for many times over by heros in uniform. Far better men than I, died that we could be FREE.

USAF FAC, 5th Spl Forces, An Loc, lll Corps, RVN, 69-70, Vietnam Vet '69-'73
rodfac is offline  
Old November 18, 2012, 05:35 PM   #3
Senior Member
Join Date: December 24, 2008
Location: Loveland, CO
Posts: 1,475
Those bullets are listed in the Hodgdon load data link
jepp2 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07405 seconds with 7 queries