The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old December 14, 2000, 10:34 PM   #1
Junior Member
Join Date: September 6, 2000
Posts: 13
Does anyone have any 9mm data for a Ruger P95. Preferably in 115gr load with Green Dot powder. Thanks for the help I really appreciate it.
RugerBoy is offline  
Old December 15, 2000, 12:23 AM   #2
Senior Member
Join Date: May 15, 2000
Location: NE Ohio
Posts: 150
Have you tried the recipe on Alliant's website (4.7 grains of Green Dot with a 115 FMJ)?
Engineer is offline  
Old December 15, 2000, 10:54 AM   #3
Senior Member
Join Date: January 29, 2000
Location: Wa
Posts: 922

I have used many differant loads through my P95 with no problums. The gun likes almost any ammo, And never fails to function.
I have found my most accurate loads to be with W231 or Bullseye.
For bullets I use 115Gr lazercast Siver/lead or 115Gr Hardcast Enterprise copper plated bullets.

The most Accurate load I have found is 4.3Gr W231
With a 115 Lazercast RN bullet. Useing a lite
Crimp and an OAL of 1.070


Tony Z
tonyz is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04355 seconds with 7 queries