|September 14, 2012, 12:11 PM||#2|
Join Date: September 21, 2008
"do the dies have to be the same brand as the press or are they one size fits all"
All modern dies with a few exceptions use the same threads and fit all brands of modern presses. Different brands can be "mixed and matched" at the same time.
Lyman dies for the 310 tool, the Dillon SDB dies, .50 BMG dies and a few others use different size/threads on their dies.
Some older Lee dies do not have enough threads on the outside of the dies for the lock ring to work. This can usually be overcome by installing the lock rings on the bottom.
Last edited by TimW77; September 14, 2012 at 12:19 PM.
|September 14, 2012, 01:45 PM||#3|
Join Date: September 29, 2008
Modern dies are interchangeable with presses except as noted above. I use a Lee turret press and use Hornady, RCBS, and Lee dies, and in some of my turrets have a mix of dies in different turret holes for the same cartridge (RCBS X-die sizing, Lee seating; or Hornady pistol dies except for Lee powder through expander die).
I started with RCBS dies mostly, but with the big price increases over the years I now get Lee dies unless I have a specific need for another brand, such as for the RCBS X-die in rifle. Especially in handgun reloading I do not see any difference in the loaded ammo regardless of die brand.
I would tend to get the same of dies as the press I have for best compatibility for add-ons later. For instance, my Lee press is absolutely great for loading with any brand dies in basic mode. But if I want to add the powder measure to the turret I really need to have the Lee powder-through expander die. The Lee powder measure will not attach to the standard RCBS dies. And if I try to mount my RCBS Uniflow powder measure to the Lee turret it is way too bulky and heavy for the Lee press. Also, some of my RCBS dies have stems that stick up too high for my Lee powder measure to clear as it rotates around.
Now it may work better to use Lee dies in the RCBS Rockchucker or Turret press, I don't know, but the RCBS press would be beefier and better able to handle a wide range of weights of accessories.
My two guidelines would be:
1) Buy the dies of the same brand as your press unless you have a specific need for another brand, but then be careful about compatibility of accessories.
2) Generally the much cheaper Lee dies do a satisfactory job on general reloading (produce ammo more precise than most shooters), especially for handgun cartridges. Only if you get into precision rifle handloads would I see a need for other brands that have micrometer seating dies, etc. If you are good enough of a shooter to shoot 1/2 MOA consistently then you already know the important factors for accurate cartridges and can select the appropriate dies. For casual target shooters and hunters any brand die will do the job and Lee is about 2/3 price of the next cheapest brands.
Although, if you can afford it, nothing wrong with owning really nice equipment such as Redding, Dillon, etc. I would rather put my money into components and firearms that do what I need, than presses and dies for aesthetic reasons alone or capabilities I don't need.
"The ultimate authority ... resides in the people alone. ... The advantage of being armed, which the Americans possess over the people of almost every other nation ... forms a barrier against the enterprises of ambition."
- James Madison
|September 14, 2012, 11:00 PM||#4|
Join Date: December 4, 1999
Location: WA, the ever blue state
Most dies have 7/8-14 thread, and most presses have 7/8-14 thread.
To get a co-ax press to work right [they don't use threads] I need the right kind of locking ring [with 7/8-14 threads]
Most lock rings are 7/8-14 threads, but the co-ax press wants the rings to be the right shape. Most presses do not care about the shape of the lock ring.
Sometimes I make dies by cutting off a piece of 7/8-14 threaded rod with a hack saw, and then boring a hole in it on the lathe.
One can make home made seater dies with a chamber reamer. Or neck dies by just boring out the neck and cutting the right shoulder angle. Which you can see I have done in these shortie dies.
My brother has done a much nicer job of making dies.
And Calhoon has made die inserts from machinable carbide and then heat treated them for making his 19 Calhoon cartridges he sells. [That is my pic, not one from his web site]
From my primitive efforts to some really nice work, we see they all are make with 7/8-14 threads, the industry standard for reloading dies.
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
|Thread Tools||Search this Thread|