The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old July 24, 2012, 04:56 PM   #1
Junior Member
Join Date: July 24, 2012
Posts: 2
dakota 10 and predator trigger adjusting

does anyone know how to adjust the triggers of a dakota 10 and predator?
irishjj is offline  
Old July 24, 2012, 08:03 PM   #2
Join Date: May 30, 2012
Posts: 26
The predator is basicly a Winchester M70 with nicer wood stock from what I have read about that gun. Although I haven't had one in my hands, I do own some M70 and their trigger is very simple to adjust.

After removing the barreled action from the stock to get access to the trigger group, all you need is a small wrench and screwdriver to adjust the trigger. If the trigger doesn't have alot of over travel than the wrench is all that you will need. The top nut is what holds the spring on the over travel screw and the amount of tension on that spring is what controls the trigger pull wieght (for the most part).

Thats the short version if you need more let me know and I'll give you the long one.

Hope this helps

dj_28 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.08574 seconds with 9 queries