The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old December 8, 2000, 06:39 PM   #1
Senior Member
Join Date: June 28, 2000
Posts: 304
Hey guys bought a Spyderco Endura today. What is the opinion here of these knives? I think they are of good quality for their price. I don't know much about knives,but have never heard anything bad about Spyderco Knives.
45automan is offline  
Old December 8, 2000, 06:56 PM   #2
Senior Member
Join Date: January 25, 2000
Posts: 544
I have a Spyderco Delica Clipit and like it.. I am going to a Gun/Knife show tomorrow and hopefully they will have some Spydrerco's I plan on picking up another one... But I think they are good quality.
shooter.45 is offline  
Old December 8, 2000, 07:22 PM   #3
Scott Evans
Staff Alumnus
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
I would agree that the Spides are good quality for the money.

When you get in to the upper price range (i.e. The Military) there are others I prefer more.

“This is my rifle, there are many like it but this one is mine …”


I’m a G-CODE holster fan !
Scott Evans is offline  
Old December 8, 2000, 10:43 PM   #4
Senior Member
Join Date: November 28, 2000
Posts: 117
Spyderco has the coolest one-handed opening mechanism by a long shot with their (patented) thumbhole. It sounds like a dumb idea, but their extra thick blades make it a real winner.

I personally prefer the shorter Delica model. It's less likely to draw attention. Until I open it, that is
navaho is offline  
Old December 9, 2000, 03:32 AM   #5
Senior Member
Join Date: April 22, 1999
Location: Chandler, Arizona, USA
Posts: 6,014
I have never been a fan of Spiderco knives. I prefer Benchmade for production knives, especially the Axis folders.
Guns cause crime like spoons cause Rosie O'Donnell to be fat!

I hunt, therefore I am.
blades67 is offline  
Old December 9, 2000, 03:50 AM   #6
Junior member
Join Date: November 25, 2000
Posts: 47
I like the all metal Spydercos, never owned one with a plastic handle and never will.

They are great for one handed use and the serrated blades stay sharp and get the job done.

Hogballs is offline  
Old December 9, 2000, 11:26 AM   #7
Senior Member
Join Date: June 24, 2000
Location: Bowling Green, Ohio
Posts: 136
Hey all,

I have always been a big fan of Spyderco knives; I own several and one of the three knives I carry daily is a Spyderco. Look for the quality of Spyderco knives to increase even more, since Benchmade just acquired the company. Benchmade is my primary knife, so this is really the best of both worlds.

NRA Life Member
Parke1 is offline  
Old December 9, 2000, 03:59 PM   #8
Join Date: July 6, 1999
Location: Minnesota
Posts: 59

Could you please direct me to where you heard that Benchmade acquired Spyderco? I have not heard such a rumor before.


I really like Spyderco's knives. My favorite is the lightweight Delica. Very easy to carry, non-threatening, plenty of cutting power, and it's legal anywhere you can carry a knife. Spyderco's quality control is also perhaps the best in the business amongst factory produced knives. Far better than Benchmade's in my personal experience.
JMB is offline  
Old December 9, 2000, 08:54 PM   #9
Join Date: November 5, 2000
Posts: 68
Spyderco makes a great knike, no ifs ands or buts about it

Go Get em Gear
Javahed is offline  
Old December 9, 2000, 11:23 PM   #10
Senior Member
Join Date: June 24, 2000
Location: Bowling Green, Ohio
Posts: 136
I work at a Gander Mountain, and the guy in charge of ordering knives told me that the Spyderco catalog had a benchmade logo on it, and said something about their new ownership.

NRA Life Member
Parke1 is offline  
Old December 9, 2000, 11:36 PM   #11
Senior Member
Join Date: October 27, 1998
Posts: 1,156
Spydercos are great using knives. I carry and use (among others) a Calypso Jr. Lightweight everyday. Their quality is very good and just as importantly consistant. There are other brands I like just as much or better but if a Spydie fits a niche for you don`t hesitate to buy it. Check out and it`s Spyderco Forum for more info. Marcus
Marcus is offline  
Old December 10, 2000, 12:57 PM   #12
Senior Member
Join Date: February 27, 1999
Location: TX
Posts: 403
Spyderco makes a great knife, super sharp out of the box. The Endura and Delica models are great knives for the money.
Benchmade quality is spotty at times, lots of reports of dull knives, blades chipping from poor heat treats, uneven grinds etc. I like Benchmade alot, but they have problems and for the money that one spends on a Benchmade knife, you should not have to spend time trying to detect flaws in it, that should be done before it ever leaves the factory. Spyderco's QC is top notch.

Parke1, Benchmade DOES NOT (for emphasis) have anything to do with ownership of Spyderco. If you have any question of that, go over to and go to the Spyderco Knives forum under makers and manufacturers.
Phillip is offline  
Old December 10, 2000, 06:18 PM   #13
Senior Member
Join Date: November 24, 2000
Location: Griffin, GA, USA
Posts: 742
I've been carrying "Spydies" for a long time...I love 'em!!! I never leave home without at least ONE handgun, at least ONE flashlight and at least ONE Spyderco knive...better to be safe know!!! I prefer the synthetic-handled Delica for everyday carry, tho' I've got several others...if I thought I would need to defend myself with a CONCEALABLE knive, the Endura would get the two cents' worth....mikey357
mikey357 is offline  
Old December 12, 2000, 10:22 AM   #14
Senior Member
Join Date: January 8, 1999
Location: Albuquerque, NM, USA
Posts: 2,541
I've had a couple; always got them at a good price. Gotta love how they open. I've noticed that cops back East seem to look at me funnier when they see the clip hanging out of my right front pocket.

My endura's clip eventually broke, so I gave it to a little brother who didn't care. I really liked the knife, thought. I use my harpy a lot gardening. Had a couple of others, but I don't remember what they were or what happened to them.

I use the serrated blades pretty hard (tho I don't do anything abusive), so I suppose I'm not too disappointed that the serrations seem to wear down. I have to say, though, that the Spyderco blades seem to wear down faster than those of any other knives I've owned.

On the other hand, they're so useful and suited for work, I might just be using them a ton more. I'd buy more at the right price.
Erich is offline  
Old December 12, 2000, 12:45 PM   #15
Ron L
Senior Member
Join Date: March 16, 1999
Location: Livonia, MI USA
Posts: 385
I've owned a Calypso Jr. with micarta handle for the past several years. I've tried others, but keep going back to the Calypso Jr. The 2 on my Christmas list are a carbon-fiber Dragonfly with plain blade and a Zowada collaboration with plain blade.

I haven't had the best luck with Benchmade. Went through 3 at a show until I found one without excessive sideways blade play and with an actual edge on it. Haven't tried any lately though, so hopefully they've gotten things together. They do have some nice designs though.
Ron L is offline  
Old December 12, 2000, 09:31 PM   #16
David Blinder
Senior Member
Join Date: October 13, 1999
Location: Norcross, GA USA
Posts: 327
I'll default to experts on this one but I know that Greg Hamilton of Insights Training favors the Delica and Gabe Suarez likes the Chinook. I personally carry the Delica because it's small enough to carry on planes and not so big that it catches attention.
David Blinder is offline  
Old December 12, 2000, 11:43 PM   #17
Senior Member
Join Date: November 28, 2000
Posts: 117
I'm looking for a place to order a few Spyderco Delica's from.

So far the best price I've seen is $46.00, at

Anyone know of a better price?

Thanks in advance.
navaho is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07490 seconds with 7 queries