The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old May 24, 2012, 01:02 PM   #1
Senior Member
Join Date: January 10, 2012
Posts: 3,546
Weaver K-4-1 scope made in USA

Does anyone know where I can get an owners manual for this scope or know the procedure to set the elevation and windage back to center or factory settings ?

This is going on a new rifle and I want to start with the setting where they were at the factory.
rebs is offline  
Old May 24, 2012, 01:13 PM   #2
Senior Member
Join Date: December 6, 2009
Location: Hudson Valley,NY
Posts: 222

With out forcing anything, turn the ring one way or the other until it stops. Then counting clicks turn in the oppisite direction until it stops again. Divide the number of clicks by two and then turn back that many clicks and it is centered. Do it again with the other knob.
Howard31 is offline  
Old May 24, 2012, 01:17 PM   #3
Senior Member
Join Date: September 21, 2010
Location: az
Posts: 1,177
Any reason why you don't want to just shoot it, see where it hits, and adjust from there? It doesn't really matter where it is, it will be off either way.

If it matters that much though you can turn the dial all the way to one side, then measure the distance to turn all the way to the other side, then put it in the middle... it's just extra steps though.
"Once you quit hearing sir and ma'am, the rest is soon to follow." - Cormack McCarthy
"Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy
huntinaz is offline  
Old May 25, 2012, 11:17 AM   #4
Senior Member
Join Date: September 12, 2010
Location: Boise, ID
Posts: 447
I just got a new K4, not made in USA, but the manual says nothing about centering it, just mounting, and how to boresight and zero it to your rifle. Amazing scope, btw!
myshoulderissore is offline  
Old May 25, 2012, 12:18 PM   #5
Senior Member
Join Date: January 10, 2012
Posts: 3,546
I zeroed in my weaver K-4 this morning and I have to say I forgot how good of a scope it is. Its the older made in the USA one. It is so sharp and crisp with plenty of eye relief. I may just leave it on the rifle and not put the 2-7 back on.
I would like to find a place online to download the manual for it.
rebs is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07903 seconds with 7 queries