The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old August 24, 2011, 06:19 PM   #1
Join Date: September 7, 2009
Posts: 68
nosler load data

I looked on noslers site, but don't see any data for IMR 4350. Can someone tell me min/max loads for the 30-06 180g nolser ballistic tip spitzer please?
Darksith is offline  
Old August 24, 2011, 06:20 PM   #2
Senior Member
Join Date: January 29, 2011
Location: south indiana
Posts: 555
go to hodgdons that who makes imr powder
M.O.A. is offline  
Old August 24, 2011, 06:33 PM   #3
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,599
My Nosler # 3 says , 51 to 55 Grains ! That's a compressed charge at 55 , you're going to have a case full ! MV is from 2550 to 2760 FPS .
oneoldsap is offline  
Old August 24, 2011, 08:37 PM   #4
Senior Member
Join Date: November 6, 2001
Posts: 1,019
Nosler 6th Edition has the same data for IMR 4350, start 51 grains--2548fps, 53 grains--2653, maximum 55 grains--2758 fps. Number 6 used a 24" Lilja barrel, Nosler case, and Win LR primer. As with most all manuals they list the same data for the Ballistic Tip, Partition PP, Ballistic Silvertip, Accubond, and Partition Spitzer. Nosler doesn't give a recommended overall length.
rg1 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04335 seconds with 7 queries