The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old January 6, 2011, 01:35 AM   #1
Junior Member
Join Date: April 26, 2010
Posts: 9
Anyone know what this pistol is and what its worth? Pictures

A friend of mine picked this up from a guy and he would like to know what it is and what its worth. I didn't find any name on it. It is small, about 4 or 5 inches total length and the caliber is about like a .22
Thanks for any help,

Replay13 is offline  
Old January 6, 2011, 02:25 AM   #2
Senior Member
Join Date: May 12, 2002
Location: MO
Posts: 5,206
Flobert parlor pistol, if I'm not mistaken. Wouldn't hazard a guess as to market value.
May a person who is relocating out-of-State move firearms with other household goods? Yes.
Sarge is offline  
Old January 6, 2011, 08:38 AM   #3
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,776
And please tell your friend - even if you can cram a 22 lr cartridge in the gun, it's not designed for it. The 6 mm Flobert was less powerfull than a 22 short, and the gun cannot handle a 22 lr's pressure.
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying.
mapsjanhere is offline  
Old January 6, 2011, 09:07 AM   #4
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
I think it was designed for something like the CB cap. Still, a collectors item, don't shoot.
Rifleman1776 is offline  
Old January 6, 2011, 06:44 PM   #5
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,896
It is indeed designed for a low power Flobert cartridge ( there were several calibers ), value is in the lower half of a hundred dollars.
RJay is offline  
Old January 6, 2011, 07:20 PM   #6
Join Date: March 31, 2009
Location: ohio
Posts: 70
Nice though maybe not woth alot but a deffinate conversation and history piece
bsheets20061 is offline  
Old January 7, 2011, 01:39 AM   #7
Junior Member
Join Date: April 26, 2010
Posts: 9
Thanks everyone!
Replay13 is offline  
Old January 9, 2011, 09:32 PM   #8
Senior Member
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,590
I didn't know that my new little toy was a copy of an actual old gun!

I've chronographed over 800 FPS using a lead BB with patch and 209 primers, it will go through 3/8" plywood. It's rifled, which, considering that there is no rear sight, seems a waste of effort to me. In addition, using a carefully held rest and a notch in the swivel plate for a rear sight it's far from making what I'd call groups.

BTW, for anyone who has one of the Pedersoli's, the secret is in removing the bleed insert just forward of the chamber, it has a hole about .015" in diameter (Guessing) and with that in place the BB's barely made it across the room.
CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P238's and P938's. Plus Colt Mustang hardened 416 guide rods, and Llama .32 and .380 recoil spring buttons, checkered nicely and blued.
HisSoldier is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.16934 seconds with 7 queries