The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old January 4, 2011, 01:05 AM   #1
Senior Member
Join Date: July 21, 2010
Posts: 240
WIN MOD 70 Magazine Spring

I've looked & looked for a place that sells a Winchester Model 70 30.06 magazine spring & I can't find a single place. I didn't know where else to turn to except here. Below I will describe my problem & see if the magazine spring is the actual problem, any help would be greatly appreciated.

I have Winchester Model 70 Westener in 30.06. The problem is that last round in the magazine just pops up & out of the magazine of the follower. It comes off as I put forward pressure on the rim of the round as soon as I begin pushing the bolt forward.

A person on this site said that it could be either the magazine spring or the feed rails. See just as long as there is a round ungerneath the round that is currently being chambered all is good, but on the last round it just pops out & on top of the magazine well & can't be chambered.

Thanks in advance for all who helps me out.
Hoskins is offline  
Old January 4, 2011, 03:49 AM   #2
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 12,894
Here you go.
Parts 61 & 62
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 4, 2011, 09:18 AM   #3
Senior Member
Join Date: July 21, 2010
Posts: 240
Thanks brother
Hoskins is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04872 seconds with 9 queries