The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old December 21, 2010, 02:05 PM   #1
Join Date: April 20, 2009
Location: Ponca city, ok
Posts: 15
Ruger m77

I was wondering if the safety on the ruger m77 disconnects the trigger mechanism or blocks it and if there is any distinct advantages to either. Thanks for the help
jdmcconnell is offline  
Old December 21, 2010, 02:37 PM   #2
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 12,900
M77 or M77 MkII?

* The original Ruger M77 (often called "tang safety") uses a sear block safety that also incorporates a lever that locks the bolt.

* Newer Ruger M77 Mk II rifles use a trigger block safety that incorporates a plunger that locks the bolt.

Which is best?

* Sear safeties are supposed to keep the sear from falling even if the trigger is pulled. The advantage is that the sear itself is held in place, which will keep the firing pin from releasing. Problems with this type of safety is that very small amounts of wear can allow the sear to fall off of the nose of the trigger sear and discharge when the safety is pushed off.

* Trigger block safeties keep the trigger from moving when the safety is engaged. Advantages of this type of safety are that the sear cannot fall unless the trigger moves, which requires releasing the safety. Disadvantages of this are as above, very small amounts of wear can allow the sear to fall off the nose of the sear if the trigger is pulled when the safety is engaged, which will allow the rifle to discharge when the safety is pushed off.

Most safeties we see are trigger block safeties, but there are some rifles on the market that incorporate both types into the same trigger. And some manufacturers (Winchester is famous for theirs) simply do away with the trigger safety and use a firing pin block.
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04880 seconds with 7 queries