The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old June 7, 2010, 09:19 AM   #1
Junior Member
Join Date: June 6, 2010
Posts: 2
GOLD RUSH lightning FIX light strike

Like others in the past, we received a near new Gold Rush from Beretta Uberti in 45Lc because the first owner did not like the light strike on primers. It would miss with light strike dent on one in four. It would ignite on second hammer strike. The repair consisted of butstock removal, right angle screwdriver removal of the mainspring screw. We placed the mainspring in a vise where one inch (from the hole ) was captured. The spring was cold bent by hand only 15 degrees bringing the hammer end surface towards the hammer increasing preload at the strike position. Reassembly was straightforward with excellent strike results. This extra spring tension was not noticeable in operation.
Note this rifle MUST have the forend held forward when pulling the trigger. The natural tendency to use the forend to hold the rifle to the shoulder must be stopped, or the bolt will be held slightly to the rear and subsequent light strike will occur from this incorrect handling of this rifle!
z3marlin is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07259 seconds with 7 queries