The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old April 26, 2010, 06:11 PM   #1
Junior Member
Join Date: April 26, 2010
Posts: 1
Stevens 22/410 Help Needed

Can anyone provide me instructions on how to replace the barrel selector, button and screw on an old Stevens Model 22/410? Any help would be sincerely appreciated.
kencva is offline  
Old April 26, 2010, 06:22 PM   #2
Senior Member
Join Date: April 6, 2007
Posts: 2,568
Sounds like some work you might want a smith to do...
Lavid2002 is offline  
Old April 26, 2010, 07:17 PM   #3
Senior Member
Join Date: September 19, 2008
Posts: 4,678
It's been almost 30 years since I've done one, and I'm too lazy to partially disassemble one of mine - but - IIRC :

Step one is, remove the barrels from the frame

Two - remove the buttstock from the frame.

Three, cock the hammer & pin the mainspring strut to relieve spring tension on the hammer.

Four, remove the mainspring & drive out it's pivot pin to remove the hammer.

* * * * * * *

The side selector should now be accessable for switching out if a replacement in on hand.

Reassemble in reverse order. (take 2 aspirin, call us in the morning )

If the "replacement" selector is actually a new hammer with the selector in it's pivoting nose, simply reinstall the hammer/mainspring, using the new hammer after first removing/discarding the broken side selector parts. (they are irrepairable, believe me when I tell you this)

Re-install the buttstock, and cover the side button hole with a dime (epoxy), or whatever.


Last edited by PetahW; April 26, 2010 at 07:23 PM.
PetahW is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07224 seconds with 7 queries