|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 16, 2010, 05:08 PM | #1 |
Junior Member
Join Date: March 25, 2010
Posts: 10
|
About Replacement Triggers
Th trigger on my .24 Ruger Remington model Seven i a little heavy. What kind of replacement trigger can I get? I know there is Timney and Jewel. I would like won that is a drop in type with as little smithing as possible. Apparently, Jewel's are pricey. are they worth it?
|
April 16, 2010, 06:58 PM | #2 |
Senior Member
Join Date: August 24, 2001
Location: LC, Ca
Posts: 1,917
|
Have you tried adjusting your current trigger?
http://www.snipercountry.com/Article...onTriggers.asp |
April 16, 2010, 10:48 PM | #3 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Jewell, Timney, Rifle Basix, any one of them will work well. Midway has them. Pretty much drop-in, just follow the instructions.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
April 17, 2010, 10:09 AM | #4 |
Junior Member
Join Date: March 25, 2010
Posts: 10
|
thanks for the advice...I think I'll work on the trigger myself. I'm sure I can handle it. Didn't know a person could do that to a Remington. If I change my mind, are the replacement triggers basically drop in or gunsmith required?
|
April 17, 2010, 12:00 PM | #5 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
They are drop-ins. Easy as pie: take the barreled action out of the stock, remove the bolt, clamp the action in a vise, drive out the two pins that hold the trigger into the action, remove the old trigger, open the package the trigger came in, read the instructions, take out the new trigger and poke around on it until you're ready to install it, then place it in the slot in the action, drive the pins back in, install the bolt, test the trigger, return the barreled action to the stock, go shooting. Pretty straightforward!
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
April 17, 2010, 06:52 PM | #6 |
Junior Member
Join Date: March 25, 2010
Posts: 10
|
Thanks again for the advice. Sorry you had to repeat yourself for me. The snipercountry article is good. will try to adjust it myself.
|
April 19, 2010, 10:22 AM | #7 |
Senior Member
Join Date: December 6, 1999
Location: Richmond, Virginia USA
Posts: 6,004
|
re: Jewell triggers. Yes, they are worth it. Some of the others are good too, but the design and construction of the Jewell sets it apart function-wise.
John |
|
|