The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old December 20, 2009, 07:56 PM   #1
Senior Member
Join Date: December 18, 2009
Location: Kirkland Wa.
Posts: 516
Good slide greese for Walther???

What is a good grease for the slide/barrel for my PPKS? Or, is just oil better? I have had FTF issues. Clips are Walther, used various ammo, no limp wrist. I just "softened" the ridge on the top of the feed ramp, polished the ramp and chamber (top mostly) to a bright finish. Also polished the rails as best possible.

Back to lube...ideas?


Last edited by RickE; December 20, 2009 at 08:22 PM.
RickE is offline  
Old December 20, 2009, 08:30 PM   #2
Senior Member
Join Date: May 4, 2001
Posts: 7,042
Most any lube will work, the Walther's like to be run a little wetter than other guns.
Many lubes will run off or dry out so check the gun at least weekly.

Truth is, any good grade, heat and water resistant grease will work fine.
Hardware store Lithium grease will do just great, and its cheap.

Apply a thin coat to the frame and slide rails, the outside of the barrel, and the recoil spring.

If you continue to have FTF problems, try a different brand/type of ammo. The PP series is sometimes picky about ammo.
Dfariswheel is offline  
Old December 20, 2009, 10:07 PM   #3
Join Date: June 16, 2009
Posts: 80
If you can locate "Magna-lube" it is one of the best greases on the market.

Southern California
Anything legal, Rifles, Handguns, Shotguns, Black powder
john323 is offline  
Old December 21, 2009, 11:07 PM   #4
Junior Member
Join Date: December 21, 2009
Location: Wixom, Michigan
Posts: 3
Walther Grease

I use Shooters Choice all weather high-tech grease with my Walther P99 comes in its own syringe and it's fantastic. No issues at all doesn't run off, temperature range is -65F to +350F !!

mel5051 is offline  
Old December 22, 2009, 01:20 PM   #5
Cliff's 45
Junior Member
Join Date: November 29, 2009
Location: Wisconsin, USA
Posts: 7
Did you get your FTF problem solved?

If it wasn't a lubricant problem, I would check the lips on the magazine. Magazine lips are a major cause to feeding issues.
Cliff's 45 is offline  
Old December 22, 2009, 02:16 PM   #6
Senior Member
Join Date: December 18, 2009
Location: Kirkland Wa.
Posts: 516
cliff's 45

I have not been able to get to the range in the last few days. I have polished the ramp, breech, and rails. Got some good light grease yesterday. The clips would be my next project if all the rest does not solve it. I have some S&B FMJ to try also. I heard they like that brand. I have never luber this PPKS very much, alway clean however. Lube may be the answer. I will post the results.

RickE is offline  
Old December 22, 2009, 03:20 PM   #7
Junior member
Join Date: February 2, 2008
Posts: 3,150
In my opinion there is little to be gained by using grease on a semi auto. It's going to pick up and hold grit (as does oil) and when the temperature drops it will slow things down. To me you may as well just use oil as needed and strip it out of the gun when you clean it and re oil. I have used nothing but Breakfree CLP since it was first introduced way back in the dark ages and I haven't found anything that works better. My guns show very little wear and function 100% in hot and cold environments.
drail is offline  
Old December 22, 2009, 05:01 PM   #8
Senior Member
Join Date: November 2, 2008
Location: Wethersfield, ct
Posts: 128
Never Seize. A little goes a long way.
fineredmist is offline  
Old December 25, 2009, 08:39 AM   #9
Junior Member
Join Date: December 21, 2009
Location: Wichita, Ks
Posts: 14
Imperial Action Wax, a little goes a long way and doesn't drip off.
mad_jack02 is offline  
Old December 25, 2009, 10:06 AM   #10
Hunter Customs
Senior Member
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 2,649
Outer's Gunslick is one of the best in my book. I've put it through some pretty tough test especially when shooting the American Handgunner World Shootoffs.
Bob Hunter
Hunter Customs is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07384 seconds with 7 queries