The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old March 27, 2009, 01:28 PM   #1
Junior Member
Join Date: March 27, 2009
Posts: 4
Load for a 154gr Lswc for a 357 mag

I am trying to find target loads for some 154 gr Lead semi wad cutters I have.
I am somewhat new to reloading. I can only find reload data to 146-150 grain
bullets and then 158 to 160 grain bullets. Could I use the higher Grain bullet
data and reduce by 10%. All help appreciated.
Lackwell is offline  
Old March 27, 2009, 03:35 PM   #2
Senior Member
Join Date: December 27, 2006
Location: Wisconsin
Posts: 1,475
You can safely use the same load data for your 154 gr lead, as what you see for the 158 lead. The diff isn't that much, technically you would be slightly less load as you get a lighter bullet. But, go with the starting load for a 158 gr lead SWC and you will be just fine.
ShootingNut is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:37 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04099 seconds with 7 queries