The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old September 7, 2008, 12:56 AM   #1
Join Date: December 2, 2007
Posts: 32
Wby Vangaurd action threads

Are the weatherby vanguard action threads the same as a weatherby mark V? If anyone knows, I need to know because I found a mark V barrel, and v'gaurds are a lot cheaper than a mark v...
bjohnson1 is offline  
Old September 7, 2008, 12:41 PM   #2
Harry Bonar
Senior Member
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804

Weatherby Mark V thread are 16V , shank is .700 long and o.d. is 1.060.
I, at this time don't have the Vanguard/Howa thread without going to the shop and digging through my barrels. But, by checking your barrel against Mark V specs. you will be able to tell.
But there is much more work to be done to a barrel other than just screwing it up - the Mark V barrel has some special cuts ar the rear whereas the Vanguard, according to my memory, does not.
Harry B.
Harry Bonar is offline  
Old September 14, 2008, 05:49 PM   #3
Join Date: December 2, 2007
Posts: 32
well, I can't really inspect the barrel, it is about 400 miles away, I was just wandering if anyone knew off hand.

The reason I am asking is because the barrel is chambered for 338-378, for a mk5 and I guess I should have also asked if the vgaurd action will even handle that round? Thanks again
bjohnson1 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07650 seconds with 7 queries