The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old April 5, 2008, 01:20 PM   #1
Senior Member
Join Date: August 27, 2005
Location: Minneapolis, MN
Posts: 322
Does anyone make these earmuffs at a reasonable price?

I'm looking for the hearing protection earmuffs that have a little radio in them that lets you hear things normally but then when the dbl level is too high it cuts out. I keep looking around and finding them for 200 dollars. Is there a place that sells them for under 100 or maybe even around 40-50 dollars?
Bonstrosity is offline  
Old April 5, 2008, 02:26 PM   #2
Senior Member
Join Date: May 18, 1999
Location: Hemet (middle of nowhere) California
Posts: 4,261
The really cheap $30-40 ones cut out all sound when they detect a loud noise. The $75-100 Peltor 6S only attenuates (reduces the volume of) the loud noises and you still hear everything. Unless you enjoy missing 50% of more of your communications then it's well worth buying quality. Otherwise just buy a set of non-electronic muffs with a 30dba rating. The -19dba 6S is fine for non-magnums on most outdoor ranges. For indoor ranges I recommend the more expensive ($120-150) 7S with its 24dba rating. And/or combining muffs and plugs.
Proud Life Member: National Rifle Association, California Rifle & Pistol Association, and the Second Amendment Foundation.
Annual Member: Revolutionary War Veterans Association (Project Appleseed) and the Madison Society.

Last edited by sholling; April 6, 2008 at 04:19 PM.
sholling is offline  
Old April 6, 2008, 03:49 PM   #3
Senior Member
Join Date: October 26, 2005
Location: Akron, OH
Posts: 328
Check out Harbor Freight. Website Here
I purchase 2 pair of these and for $19.99 they work great. I use them at both indoor and outdoor ranges. You can order them online or if there’s a Harbor Freight near you make sure you print the online add and take it with you. They will match the price. They were $24.99 at the store, but they sold both pair at the online price.
BigV is offline  
Old April 6, 2008, 11:01 PM   #4
Senior Member
Join Date: August 27, 2005
Location: Minneapolis, MN
Posts: 322
Good to know, thanks for the replies, I might try the ones from harbor freight since I have one here in my area and if they get annoying I'll shell out the extra money for the nicer ones.
Bonstrosity is offline  
Old April 7, 2008, 02:24 AM   #5
Senior Member
Join Date: February 21, 2005
Posts: 566
Good runs will cost over $100. Yo get what you pay for......
Life's tough. But it's tougher when you're stupid.
BreacherUp! is offline  
Old April 7, 2008, 04:04 AM   #6
B. Lahey
Senior Member
Join Date: March 17, 2008
Location: Indiana
Posts: 2,853
With the $20 Peltors you do indeed get what you pay for.

I picked up a pair of the Howard Leight muffs from Midway for $60 after I got sick of the supercheap Peltors. They work well. The sound quality is not great, but they beat the Peltors by a mile. You can leave the batteries in them and batteries last a very long time. They seem sturdy and well-made.
B. Lahey is offline  
Old April 20, 2008, 06:13 PM   #7
Senior Member
Join Date: June 17, 2007
Posts: 641
I can recommend the Silencio Falcons. About $50 if you look around, takes 2 AAA batts, and has separate volume controls for each ear. A good value for electronic muffs.

Blessed is the man who has nothing to say, and cannot be compelled to say it.
jhansman is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06647 seconds with 9 queries