The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old October 11, 2012, 07:50 PM   #51
Yung.gunr
Senior Member
 
Join Date: November 11, 2010
Location: Phoenix area
Posts: 1,442
Make your own

Here is a good one I like where you can make your own design.

http://www.printtargets.net/
Yung.gunr is offline  
Old January 20, 2013, 03:19 AM   #52
felixx
Junior member
 
Join Date: January 16, 2013
Posts: 39
www.remington.com has them too..
I print them on normal paper, then use the colour copier to copy them onto cardboard.. works a treat!
felixx is offline  
Old March 25, 2013, 10:15 AM   #53
abherbitter
Member
 
Join Date: March 11, 2013
Location: Alabama
Posts: 31
Here's one I really like (hope the attachment works)
Attached Images
File Type: jpg target_shooting_diagnosis.jpg (202.3 KB, 82 views)
__________________
Your 9mm could, and in all likelihood will expand. But my .45 will never get any smaller.
abherbitter is offline  
Old July 14, 2014, 02:20 AM   #54
brokefilam
Junior Member
 
Join Date: July 5, 2014
Posts: 3
great share!! My brother in law works as an architectural drafter. Gonna see if he can print some of these for me!
__________________
-Dizzle
__________________________
http://www.ultrasonicguncleaner.org
brokefilam is offline  
Old November 15, 2014, 12:44 PM   #55
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678


For more than a decade I have been printing this free image. They work well for the 100 yard ranges near the city of Seattle.



But for target practice where I hunt, 900 miles from Seattle, I have been using store bought targets. These cost $100/100. That sounds like a lot of money until you figure your time to check out a target.
__________________
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
Clark is offline  
Old July 31, 2017, 11:06 AM   #56
Don Fischer
Senior Member
 
Join Date: March 2, 2017
Posts: 592
Really old thread but didn't see where any paper for printing was. I got some.

What is the point of those heavy lines? As for paper in your own printer, I got a package of 13x19 HP presentation paper years ago thinking it was a matt paper. Bit heavier than reg typewriter paper. have to try it!
Don Fischer is offline  
Old September 3, 2017, 10:23 PM   #57
jjmotsch
Junior Member
 
Join Date: April 3, 2010
Posts: 5
Where can I buy cheap printer ink???? LOL
__________________
jjmotsch
Check us out:
ak47news.com
jjmotsch is offline  
Old September 4, 2017, 10:15 AM   #58
Don Fischer
Senior Member
 
Join Date: March 2, 2017
Posts: 592
I was just looking at a place yesterday but don't recall where it was. I tried inexpensive ink and didn't go all that well. Ran out of ink and no clue it happened till photo's started coming out bad. The tanks you get sound expensive but they really aren't. The multi color tanks are expensive as one color runs out and you throw what's left in the other colors out as well. I have a Canon 9000 mk II and it come's with individual tanks, most inexpensive way to go. I also have a Canon iP100 with a black tank and three color tank. Ink is only expensive until you see how far a tank really goes. Printer can be had for next to nothing, certainly the expect to make money on the ink but gotta wonder. If someone was to print only target's and then use only black ink, how much could they really make? You can get a printer for target's for around $50, look in the Bi Mart or Walmart type store.

I have made my own target's for years, always figured store bought were a waste of money. Recently I found on Mossberg's site they have free target's to print out that aren't to bad. Printed up a few of each. The aiming point on them is to small to shoot a couple of my rifles but I got a package of those stick on orange dot in 2" to stick on and problem solved.
Don Fischer is offline  
Old September 4, 2017, 04:33 PM   #59
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 13,741
Garand Sighting Targets

Yes. Ink. A lot of these targets are heavy on black ink. I think you can put the PDF files into a thumb drive and take them to Kinko's and have a master laser printed. Once you have that, you can use a copier to make the rest. If you want to use some form of tagboard, the Kinko's people can direct you to a copier that will work with it. (Amazon has that in various weights and colors. DO NOT presume you can tell how heavy the paper you order will be by the usual bond pound numbers as they are different for tagboard. This is because the base page dimensions for bond are 17"×22", while for tagboard (aka, tag paper) it is 24"×36", and thus the standard 500 sheet ream of tagboard weighs more than a ream of equal weight/in² bond. Also, to confuse things further, the two don't have the same density. So, best just to look it up on a table).

I've attached my Garand sighting targets. The last two pages are meant to be stitched together using a ruler to set the top as indicated to get you out to 600 yard POI at the line crossings.
Attached Files
File Type: pdf M1 Garand Zero Targets.pdf (50.0 KB, 10 views)
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06796 seconds with 8 queries