The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old May 25, 2000, 12:08 PM   #1
James E
Junior member
Join Date: April 20, 2000
Posts: 371

Can anyone advise me what is needed to load the .45 auto rim cartridge. I'll need a shell holder for the fat rim, but can I load these cases with .45 acp dies?

Thanks in advance to any response, Jim

James E is offline  
Old May 25, 2000, 12:11 PM   #2
Senior Member
Join Date: March 30, 2000
Location: Central Texas, outside of Austin
Posts: 1,698
Standard .45ACP dies work fine.
HankB is offline  
Old May 27, 2000, 08:21 PM   #3
Senior Member
Join Date: May 26, 2000
Location: Hastings, Nebrasksa - the Hear
Posts: 2,133
Same dies are suitable. However, you will need to change the seating depth for different bullets... (I shoot heavier SWC bullets in my AR) and you'll want to crimp the AR ammo tightly.

Archie is offline  
Old May 28, 2000, 01:08 AM   #4
Senior Member
Join Date: November 5, 1998
Location: SouthWest
Posts: 204
I also change the crimp die when I load AR or ACP brass for my revolvers. The normal crimp is a taper crimp but since it is for revolvers I use a Redding Profile Crimp.

NJW is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06220 seconds with 9 queries