The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old July 2, 1999, 05:33 PM   #1
Join Date: December 29, 1998
Posts: 18
Does anyone have any experience with the 350 or 405 grain Lazer Cast bullets? I will be using them in a new Marlin 1895 with the Ballard rifling. I would be interested in your favorite load.
Ranger1 is offline  
Old July 5, 1999, 04:58 PM   #2
Junior Member
Join Date: July 4, 1999
Posts: 2
Ranger1 - I use the Laser Cast 405 grain in my Ruger #1 and have found them to be very accurate. I have been using loads from the #47 Lyman's handbook. They have some interesting loads using Unique and 2400 pistol powders with dacron wadding that I have found to be very accurate and pleasant to shoot. I have found that loading to levels that the Ruger is capable of handling will shake your back teeth loose!

I would recommend that you get a copy of the Lyman Manual and also the one that Laser Cast started putting out this year. Both are very informative, especially the Lyman manual.
rjbx is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04106 seconds with 7 queries