The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old January 14, 2000, 12:51 PM   #1
Join Date: December 24, 1999
Location: Hatley, WI USA
Posts: 47
The gun is a model 128 bolt action 12 ga. 2 3/4" shells only. I have a magazine for it, but it's missing the spring and follower. Are there any magazines out there that could be modified? I'll try Gun Parts Corp. if that's my only choice, but the wait can be long this time of year.

I don't want to give up on this old workhorse. The action and barrel are in great shape, and the grain pattern on the walnut stock is drop dead gorgeous! Any hope for me?

Doubleought is offline  
Old January 14, 2000, 10:23 PM   #2
George Stringer
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Doubleought, I'd try Gun Parts first but you can make a follower. Especially for shotgun mags as the follower won't have the hump. I would measure the outside dimensions in the center of the body and measure the wall thickness from the bottom or one of the ends, wherever you can get to it easiest. Subtract that thicness from your length and width measurements and that will five you the basic rectangle. Any sheet metal 1/16" thick or a little thicker would work. Once you get the basic rectangle you may have to do a little more fitting as you go but it isn't that hard. You can probably use a Mauser or like magazine spring in it. Probably take a couple of hours but might be the way to get it shooting again. George
George Stringer is offline  
Old January 17, 2000, 11:40 AM   #3
Staff Alumnus
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
You may want to try They carry many obscure and obselete magazines.
fal308 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.08530 seconds with 7 queries