The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Thread Tools Search this Thread
Old December 16, 2005, 02:24 AM   #1
Junior member
Join Date: November 30, 2005
Posts: 28
Mossberg ATR 100 (.270 & 30-06)

Well, today I got the 30-06 version, and mounted a Bushnell Sportsman 3-9x40 on it, and 1 box Remmy 180gr Core Lokts.

Total cost was $340 with tax at Wally World.

Then I took it out to the woods.

Without even adjusting the scope and at 100yds I marked 2" to the right and 2" low of center on the "FIRST" shot.

The very next shot was "DEAD ON" center !!!

I then adjusted the scope 8 clicks for 2.0" over dead center for an appx. 200 yd zero.

The very next 3 shots were 2" above the first one and made a hole that you could cover with a nickle (all three touching)!!!

One Shot for sighting in

Four shots "Dead On" exactly where they were aimed.

My friend took his turn with it, (Mandatory if you bring a friend),
and to his amazement printed a 5 shot 1.25" group.

So being utterly amazed myself I headed back to Wally World.

I went and got the .270 version with the same scope and some 150gr. Core Lokts. Same cost $340.00

Then it was back to the woods.

It took a couple of shots to sight it in but the next 8 shots printed a 2" group.

Then my friend gave it a try, I think his shoulder might have been hurting because this time his groups were 1.75"

So right now I've got two great setups for myself or family / friends,
a bruised right shoulder, and an upset, irate wife.

and all for under $700.00

Only time will tell if they can hold up, but it definitely put 'em where I aimed 'em today.
beagle is offline  
Old December 16, 2005, 10:39 AM   #2
Junior member
Join Date: May 31, 2004
Location: The Toll Road State, U.S.A.
Posts: 12,451
Sounds awesome. Your wife should be thanking you for finding such a great value!
FirstFreedom is offline  
Old December 16, 2005, 10:48 AM   #3
Senior Member
Join Date: May 19, 2005
Location: Valdosta, GA
Posts: 953
I read a review on those rifles (I think in american rifleman) and it said they were top notch for the money. How's the fit and finish? Congrats on getting two good ones.
Clayfish is offline  
Old December 16, 2005, 12:36 PM   #4
Join Date: September 24, 2005
Location: Texas
Posts: 19
Thanks for the info on your rifles. I have been interested in these rifles for a while now. I have read somewhere about instances of A.D. while closing the bolt. Does anyone have any info about a possible sear problem with these rifles?
Badreno is offline  
Old December 17, 2005, 04:28 PM   #5
Junior member
Join Date: November 30, 2005
Posts: 28
As far as fit and finish goes, it's a synthetic stock and IMHO I think its perfect. It feels great at the ready, and I think it looks very nice.

I'm fairly rough in the handling department, but with the synthetic, I'm not worried about nicking or denting the wood as with my Remmy 7400.

The action to me is very smooth and I had no problems whatsoever cycling the next round, and bringing it to the ready again.

The trigger has just a tad bit of creep. Not too noticeable, but I'm not picky about that aspect much anyway.

But overall, I think both rifles for $680.00 (with the way they performed) is probably the best deal I've ever come across.

It definitely makes "Made In the USA" proud.
beagle is offline  
Old December 17, 2005, 05:41 PM   #6
Senior Member
Join Date: December 7, 2005
Location: Pittsburgh Pa.
Posts: 195
Anyone have a pic of this rifle? I went on Marlin's website and couldn't find anything!
Gotta Love The Smell Of A Good Rifle Powder!!!
rahtreelimbs is offline  
Old December 17, 2005, 06:08 PM   #7
Senior Member
Join Date: November 22, 2004
Posts: 1,682
Anyone have a pic of this rifle? I went on Marlin's website and couldn't find anything!
You might want to try Mossbergs website not Marlins.
RevolverLover is offline  
Old December 19, 2005, 07:54 PM   #8
Junior Member
Join Date: December 17, 2005
Posts: 13
I'm gonna break down and get the 30.06.

Last edited by slinger70; December 20, 2005 at 01:19 AM.
slinger70 is offline  
Old December 24, 2005, 03:54 PM   #9
Junior Member
Join Date: December 2, 2005
Posts: 9
i own the same rifle in the 30-06 with a 3-12-40 bushnell ledgend scope and it is very accurate these guns would be even better if the action was beded better in the stock. but i have killed so many things w/ my 06. love it.
wo55d is offline  
Old December 29, 2005, 04:09 AM   #10
Junior member
Join Date: November 30, 2005
Posts: 28
Howdy fellas.

Hope ya'll had a Merry Christmas.

Just finished up the last day of a 3 day hunt with the 30-06 ATR.

Got a 6pt on the first day, an 8pt and a doe on the 2nd, and today we ate part of the 6 pt. and I rested, no sense in being greedy.

I also took a turkey buzzard at about 150 yds with a dead center chest shot. Buddy, it came off the branch like a downed kamikaze plane
(In case you're wondering it was too close to my 8 ptr.)

The doe was about 130yds away and both bucks at about 165yds. The only one that got more than a step after being shot was the 6pt and he got about 10yds before folding.

I can tell you that the ATR didn't hiccup once and neither did the scope. I was using Remmy's core lokt 180gr and everything was perfect.

I figure I'll get back at least a couple of more times before the season ends, but right now, I'm as giddy as schoolgirl on prom night.
beagle is offline  
Old December 29, 2005, 08:35 PM   #11
Senior Member
Join Date: July 8, 2001
Location: North Central Florida & Miami
Posts: 3,060
Oh my, another wonder weapon. Dirt cheap, and oh so accurate. Great hunting luck too.
Nemo Me Impune Lacesset

"The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.".........Ronald Reagan
Mannlicher is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06759 seconds with 7 queries