The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old November 25, 2005, 06:50 PM   #1
Senior Member
Join Date: November 1, 2005
Posts: 211
Dry shooting: wear and tear?

Gentle folks,
Is there any reason to use less expensive guns for dry shooting practice? i.e. does it contribute at all to any aspect of wear and tear? Apparently there is no wear to barrel; but what about pin, spring, or any other components - considering that during such practice a firearms can be "dry fired" hundreds (or even close to thousand) times per session.

On a slightly different note: do you have a strong opinion about dry shooting practice in general?

Best regards to all !

Cross posting to "Tactics and Training"...
samoand is offline  
Old November 25, 2005, 07:34 PM   #2
Senior Member
Join Date: October 29, 2004
Location: Behind the Lines in Cali
Posts: 114
For what it is worth... I yse snap caps for my dry fire practice. For both my revolver and my simi auto pistols. Helps with the fast draw, aquire and squeeze practice. Stand in front of mirror and practice.
Aim Straight and Have Fun
AZta2guy is offline  
Old November 26, 2005, 06:21 PM   #3
Senior Member
Join Date: November 1, 2005
Posts: 211

Thanks for your response.

Best regards, and safe shooting.
samoand is offline  
Old November 27, 2005, 09:33 PM   #4
Senior Member
Join Date: October 24, 2005
Posts: 120
I did 16 years on the Army rifle team ,and we dry fired every day . I don't remember any problems caused by it . But like Azta2guy I would use snap caps . You can make one to fit your rifle or pistol by takeing the eraser off of a pincel and fiting it into the primer pocket of an empty round then seating a bullet on it .
hIPSHOT33 is offline  
Old November 27, 2005, 11:05 PM   #5
Senior Member
Join Date: May 21, 2004
Posts: 315
I agree with the use of snap caps. Dry firing is very good practice for shooting skills. I can't imagine any modern firearm being harmed by dry firing when snap caps are used. It's also a good way to smooth trigger action particularly with a double action.

I will on occasion develop a flinch when firing my .44 or anything else with stout recoil. I've found the best solution is to load it with snap caps and dry fire until the flinch goes away before resuming live fire. This will draw some grins at the range from the testosterone crowd. My take is that while putting lead downrange is fun, doing so while not being able to call your shots is a waste of perfectly good lead.

All that being said, you don't have to have a firearm with heavy recoil or a flinch to benefit from dry firing and you can do it at home.
scottys1 is offline  
Old November 28, 2005, 01:28 AM   #6
Dave Haven
Senior Member
Join Date: February 1, 2000
Location: near Flagstaff, AZ
Posts: 790
Having worked as a gunsmith, I have seen a number of broken firing pins caused by dry-firing 1894 Winchesters and Marlin 336's. Considering the sheer quantities of those rifles in existence, it's probably not much of an issue, even with those particular models.
Most guns can be dry-fired without damaging anything. Even the Ruger "Old Army" cap-and-ball revolver can be dry-fired without damaging anything. (The hammer doesn't contact the nipples). In fact, Ruger recommends dry-firing to familiarize oneself with the firearm.
Dry-firing is a common practice among competitive shooters. It helps with trigger control.
NRA Endowment Member
FCSA Life Member
Subs are cool, but belt-feds RULE!
Dave Haven is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:49 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05511 seconds with 7 queries