The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old June 26, 1999, 11:33 AM   #1
Senior Member
Join Date: May 20, 1999
Posts: 171
I'm not really satisfied with mine and the ones that I've seen that have been worked on left room for improvement. They seem to catch on a rod shaped part behind the trigger putting a hiccup in the pull. Is that just from poor work? Are there any after market triggers you would recommend? I don't want to spend a whole lot but shooting off a bench when you're not happy with a trigger is frustrating.
Thanks in advance.
Little-e is offline  
Old June 26, 1999, 04:15 PM   #2
George Stringer
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Little-e, Volquartsen makes a drop in hammer for about $33. Power Custom has a hammer and sear package for $55.95. The Volquartsen hammer is supposed to reduce your pull by 50% and the Power Custom folks claim that their package will give you a 2-1/2# pull. I was thinking that Volquartsen had some kind of package as well but I don't find it listed. These are available from Brownells (515) 623-5401. You can contact Volquartsen to find out what they do offer at (712) 792-4238 and Power Custom at(573) 372-5684. George
George Stringer is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05413 seconds with 9 queries