The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old April 26, 1999, 04:24 PM   #1
Join Date: April 24, 1999
Posts: 25
I have a Factory Mini 14 magazine that has a small amount of rust spots on it. Can anyone advise me how to remove the rust spots?
like2shoot is offline  
Old April 26, 1999, 05:33 PM   #2
James K
Join Date: March 17, 1999
Posts: 24,160
A piece of oiled steel wool lightly rubbed across the surface usually works. Other techniques are copper wool or brass wool (available in grocery stores for cleaning pots) and oil. Scraping with copper can remove slightly heavier deposits; use an old (pre zinc) penny.

Brass or copper will leave a deposit which will darken nicely with touch up blue after you clean off the oil.

James K is offline  
Old May 1, 1999, 12:12 AM   #3
Senior Member
Join Date: December 29, 1998
Location: Onalaska Tx, USA
Posts: 116
Get some ZUD ferom the grocery store. It attacks only rust, not bluing. waterbased with a soft toothbrush should take care of the problem.
Reloader is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05543 seconds with 7 queries