The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Thread Tools Search this Thread
Old March 26, 2000, 08:34 PM   #1
po boy
Senior Member
Join Date: January 30, 2000
Posts: 145
I've been using clean shot powder and the only problem is cleaning the brass case afterwards.I e-mailed the factory with no responce after firing it leaves a greenish buildup on the inside that looks like very old ammo anyone hade this problem and know how to clean ?????????thanks
po boy is offline  
Old March 26, 2000, 10:12 PM   #2
Joe West
Join Date: November 29, 1999
Posts: 41
Everyone who uses Cleanshot has that problem. No many replies from the manufacturer either. Cleanshot attacks brass/copper. The cases should be cleaned in NON-ammonia [ammonia attacks copper also]cleaner as soon as possible [the vinegar based windex is good], wiped clean inside and out, dried, and then tumbled. A small soft nylon bottle brush cleans the inside of the cases. Many will still turn dark but you can stop the weakening process indicated by the green oxidation.
Hope that helps. Cleanshot works very well in the larger cases such as 45-70.
Joe West

Joe West is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04776 seconds with 9 queries