The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old May 25, 2005, 07:58 PM   #1
Join Date: January 25, 2005
Posts: 52
lc smith

can you tell me about an lc smith 12 gauge side x side with damascuss barells. thats all the info i have now . but more to come
rmdrake is offline  
Old May 26, 2005, 08:12 AM   #2
Senior Member
Join Date: December 3, 2004
Location: The Lower Forty of Hill Country
Posts: 177
According to the definitive book on the subject titled L.C. Smith Shotguns by Lt. Col. William S. Brophy, USAR Ret.:

"The first L.C. Smith barrels were either Damascus or Twist steel. Neither of them is considered safe, by today's standards, for use with modern shotshells and should be retired from service.

"In descending order, these barrels were described as: Finest Damascus, Very Fine Damascus, Extra Fine Damascus, Fine Damascus, Good Damascus, and Best English Stub Twist.

"It is alleged that L.C. Smith barrels were frequently made to look like Damascus steel to please the sportsman who thought that Damascus was the best and strongest type of steel, or for the gun fancier who liked the swirl and curl pattern of Damascus steel. But this allegation is not true. NOTE: L.C. Smith shotgun barrels were never made with a phony patter which was put on the barrels to make them look like Damascus steel. If your barrels have the distinct pattern of Damascus or Twist steel, they are genuine!!"

Brophy's book has extensive model/serial number tables. If you can provide the gun's model and serial number, then I can look up the date of manufacture for you.

In the meantime, please take his admonition to heart and DO NOT attempt to shoot this gun using today's shotshells. The result could be a burst barrel which could cause injury or be fatal.

If your heirloom is a high-grade L.C. Smith, I recommend having it thoroughly vetted by a competent gunsmith. He/she can evaluate its safety for use with certain black powder loads, or the possibility of having the barrels sleeved so that it may be safely used with today's shotshells.

Good luck, and good shooting (but only with a safe gun)!
"If we're all thinking alike, somebody isn't thinking." General George S. Patton, Jr.

Last edited by HunterTRW; May 26, 2005 at 09:14 AM.
HunterTRW is offline  
Old May 26, 2005, 08:14 PM   #3
Join Date: January 25, 2005
Posts: 52
thanks hunterTRW, the info will be given to the friend that asked me to inquire about this gun. iam certain that he will not shoot it .all info is greatly appreciated. thanks again
rmdrake is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.10949 seconds with 7 queries