The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old May 6, 2005, 10:02 AM   #1
Senior Member
Join Date: November 21, 2004
Location: NJ
Posts: 162
supermatic citation

Harley, If possible can you email me take down instructions for the above pistol. Thanks, John
JohnLizCas is offline  
Old May 8, 2005, 04:22 AM   #2
Harley Nolden
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
Regrets: I don't have it


Harley Nolden is offline  
Old May 28, 2005, 03:54 PM   #3
Senior Member
Join Date: May 18, 2001
Posts: 386
Maybe someone over at help.
All stations stand by for flash traffic...
BADSBSNF81 is offline  
Old May 28, 2005, 06:16 PM   #4
Senior Member
Join Date: July 26, 2001
Location: The Bearflag Republic
Posts: 579
Got 1 = To take it down......

1. Work the slide and put the safety 'on'.

2. Remove the magazine.

3. Hold the pistol by the grip with your right hand, and with the left hand gripping the barrel, depress the takedown button located at the forward end of the frame back into the frame & lift the barrel straight up as the barrel stud loosens.

You now have a barrel and a frame with the slide/striker intact, = push the slide forward out of the frame tracks and you will have the 3 component parts of the weapon, adequate for cleaning.
If you have to disassemble the frame/trigger or slide further, I'd find a competent gunsmith..... I've had more than 25,000 rounds through mine & have never had to completely disassemble the weapon past the 3 component
"It is evident that scepticism, while it makes no actual change in a man, always makes him feel better.".....H.L.Mencken
Crimper-D is offline  
Old May 29, 2005, 09:10 AM   #5
Senior Member
Join Date: February 28, 1999
Location: Arizona, USA
Posts: 725 is a good place for High Standard although C/D does what I have always done with mine. Quantrill
Quantrill is offline  
Old June 6, 2005, 07:24 AM   #6
Senior Member
Join Date: November 21, 2004
Location: NJ
Posts: 162

Gents, thanks for your advice. Worked great. Didnt realize how simple it was.Alsoo found website at John
JohnLizCas is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06291 seconds with 7 queries