The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old July 10, 2005, 02:40 PM   #26
Harley Nolden
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
sent by separate email

Harley Nolden is offline  
Old August 4, 2005, 04:38 PM   #27
Junior Member
Join Date: August 4, 2005
Posts: 1
This rifle.

Is there a step by step disassembly/assembly instruction? I'm in a some trouble.

I need to have this ready in two days... I'm gonna get it.
Squirrel is offline  
Old October 25, 2005, 05:49 PM   #29
Junior Member
Join Date: October 25, 2005
Posts: 1
I'm stuck too!!!

I need the step by step disassembly/assembly instruction too. I thoght I could figure anything out but I have now been humbled....
AuTiger2005 is offline  
Old November 17, 2005, 07:21 PM   #31
Junior Member
Join Date: November 13, 2005
Posts: 4
would also appreciate instructions thanks
email:[email protected]
smeagols is offline  
Old November 19, 2005, 04:09 PM   #33
Junior Member
Join Date: November 18, 2005
Posts: 1
Harley...I just wanted to say thanks for sending the instructions...they are exactly what I was looking for and you are a great resource!!!...thanks again.

Pharmr is offline  
Old December 19, 2005, 09:17 PM   #35
Swan Hunter
Join Date: February 26, 2005
Posts: 46
Remington Nylon 66

Yep, I need the instructions also...I have one that is firing about 3 full auto and then jamming! Not least not predictable! I was afraid to jump into the beast. Are there still parts for these anywhere?

Thanks A LOT!

[email protected]
If I had known having parents would have been this much trouble, I wouldn't have had any!
Swan Hunter is offline  
Old January 3, 2006, 03:57 PM   #37
Junior Member
Join Date: January 3, 2006
Posts: 1
appache 77 disassemble reassemle

Need to know how to get my apache 77 apart and then back together to clean. Please someone email me and tell me how to get it apart. [email protected] Thank you so much, I have little time to get this done before my son's birthday and its one of his presents so as soon as you can get me an answer would be great. Thank you thank you!!!
lilmomma is offline  
Old January 30, 2006, 10:51 PM   #39
Junior Member
Join Date: January 30, 2006
Posts: 1
Nylon 66 help

A coworker gave me a nylon 66 in parts to put back together for him. I was able to get most of it together until I got to the cartridge stop spring??? I have tried a few ways of putting it together but it still won't work properly. Can anyone help? Thanks in advance.

Nain is offline  
Old February 2, 2006, 07:00 PM   #40
Junior Member
Join Date: February 2, 2006
Posts: 6
Same same many times

I need the step by step disassembly/assembly instruction too. Also can I use my nylon 77 receiver cover on my nylon 66 frame?
Cunfuzed1 is offline  
Old March 3, 2006, 04:14 PM   #41
Junior Member
Join Date: March 3, 2006
Posts: 2
Bought the 66 in `82 and have put more rounds through it than there are to fire. Unfortunately, this year the action started to get a bit sticky, so I decided to clean out the carbon. I have the original schematic so I thought, 'what could go wrong?'. Would like some particular instruction as to safe removal of bolt handle and proper reseating of barrel.

I've used this weapon so long that it seems to point itself, sure hate to have to continue using the Ruger 10/22 (too heavy/box clips...).

Please send disassembly/reassembly instructions (much appreciation).

[email protected]
ivanx is offline  
Old March 4, 2006, 08:23 PM   #42
Junior Member
Join Date: March 4, 2006
Location: Within passport range
Posts: 1
Ah, to Make the Nyklon 66 Fire...

Along about for my 21st birthday, my best friend gave me a new Remington Nylon 66 . Seemed like a nice enough rifle, at the time, but it never quite learned to chamber the next round.

Thought it might get over that, but 'Ve always had to eject an unspent shell, in order to chamber the one behind it.

Noticed that you've been able to help the fellers before me and would sure appreciate similar info. Guess it's about time to get real familiar with an otherwise darned comfortable rifle.

My friend and I still keep in touch on a regular basis. It'd be nice to call and tell him I'd fixed the thing (he gets all soft and mushy over stuff like that). Thank you, in advance, kind sir.

[email protected]
flyker is offline  
Old March 18, 2006, 08:03 PM   #43
Junior Member
Join Date: March 3, 2006
Posts: 2
Mr. Nolden, many thanks. Have now passed my own test (performed fourth disassembly/reassembly from memory). Will only put Yellow Jackets through this rifle from now on, had been using off-brand for the past year.
I was surprised that, although there was enough carbon build up to keep me permanently restricted to Post, this 24yr. old - never been cleaned - constantly used weapon is essentially in perfect condition (didn't even have to readjust the aim).

Will be recommending this site and your forum to fellow gun owners.

Keep up the good work!
ivanx is offline  
Old March 21, 2006, 04:03 PM   #46
chuck c
Junior Member
Join Date: March 21, 2006
Posts: 1
nylon 66

Just got a Remington nylon 66 from my father in-law.I would appreciate the assemble/disassemble instructions. Thank you in advance! Hope it makes it past the network stuff.
chuck c is offline  
Old March 23, 2006, 08:49 AM   #47
Senior Member
Join Date: December 2, 2004
Posts: 129
A friend brought me one with the parts in a baggy, luckily I had an old NRA book that covered it. what a nightmare!!
GUNSMOKE45441 is offline  
Old April 19, 2006, 08:58 PM   #49
Join Date: April 19, 2006
Posts: 17
Harley (or one of you guys that have already gotten them), please send me a copy of those disassembly/reassembly instructions too. Stumbled upon a Seneca Green 66 today at a pawn shop and couldn't let it pass me by. Probably paid a little more than she's worth at the moment as she needs some tender loving care. Gun is all together and shop owner guaranteed it (for what that's worth). Figured it would be a worthy cause to finally give this one a home that she can feel safe in. With those instructions and some quality time, I should have her back in top shape before even I know it.

Ten-fold thanks in advance to Harley and the crew.

onebohemian is offline  
Old April 20, 2006, 01:58 PM   #50
Harley Nolden
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884

Instructions sent by separate email

Harley Nolden is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.13451 seconds with 7 queries