The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old October 7, 2002, 07:00 AM   #1
Join Date: September 28, 2001
Location: Greer, SC
Posts: 19
40 S&W with 3N37

I have been loading my 40 S&W using 3N37 with 180 gr FN jacketed bullets. My latest purchase was 165 gr Remmington GS bullets because they were cheaper and I wanted to try a lighter bullet. I have been searching for load data for this 165 gr bullet with the 3N37 powder and can not find one. Does anyone in the TFL have load data for this combination? There is 3N37 data for 155 gr and 180 gr bullets. Can I just interpolate between these two loads?
jw29650 is offline  
Old October 7, 2002, 11:51 AM   #2
Senior Member
Join Date: August 13, 2001
Location: Montana
Posts: 489
sricciardelli is offline  
Old October 7, 2002, 08:22 PM   #3
Senior Member
Join Date: June 7, 2001
Location: Denver, CO
Posts: 342
My understanding is that data for a heavier bullet will be safe for a bullet that is the same but lighter. VV lists data for 3N37 in the .40 with 170gr bullets on their site,
5.8gr 1037fps
6.8gr 1148 fps

If it was me, this is where I would start.
nyetter is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.08119 seconds with 7 queries