The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools Search this Thread
Old December 3, 1998, 11:39 AM   #1
DonL
Senior Member
 
Join Date: November 6, 1998
Location: Michigan
Posts: 217
Having just picked up a Remingtom 700 ADL (nylon stock, Weaver 3-9 X, 2-3" so far) at a very reasonable price, I'd like to think about tuning the rifle a bit without having to spend a small mint (or the cost of another, more expensive rifle). I'm not real sure what to expect from this rifle yet, and have only tried one type of ammo. It also occurred to me that there are probably a number of us on the forum that have regular off-the-shelf rifles in closets, gun safes, and cabinets. Any tips or sources for those of us who have run-of-the-mill rifles, but would like to sqeak a bit more performance out of it?

DonL is offline  
Old December 5, 1998, 11:06 AM   #2
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
Don
Try different ammo. You'd be amazed at the difference ammo selection can make. I'm not just suggesting the premiun stuff either. Some guns work better with the standard loadings.If it's in a caliber that several people you know have, have everyone buy 2 or 3 boxes of ammo each. Or pool the ammo money and buy several different mfgrs loading. Bedding is an option. Use the search feature at the top of the page to find the previous threads on bedding. Make sure all of your srews are tight (on the weapon ) Also are you shooting offhand or from a rest. If a rest, are you comfortable and relaxed in your shooting position? If not you may be moving around too much or the action of your breathing may be moving the weapon. Another option that would be plausible if you plan on shooting a lot would be to reload. It would pay for itself in the money saved, but only if shooting frequently.
fal308 is offline  
Old December 5, 1998, 05:01 PM   #3
Art Eatman
Staff
 
Join Date: November 13, 1998
Location: Terlingua, TX; Thomasville, GA
Posts: 24,772
DonL: Agree with FAL308. Also: Check your scope focus for parallax (you move your eye, the target/crosshair alignment changes) and screw the eyepiece in or out until everything stays steady.

A poor-boy, lazy-guy bedding system which has worked for me on bunches of rifles is to free-float the barrel forward of the receiver-ring, although I take very little wood from the forward-most one-inch of the stock. I then take kitchen wax-paper and cut a 3/4" strip, and use it as a shim between the barrel and the fore-end of the stock. I keep folding it until it takes about a five-pound pull to make clearance between the barrel and the stock. Trim with razon. Shoot 5-10 shots, quickly, to heat the wax and make it all stick.

The wax paper acts as a "shock absorber" and dampens barrel vibrations. The theory is that the vibrations are uniform from shot to shot.

I have done this with no other changes in the gun or the load, and reduced group sizes from 1-1/2" or so on down to under an inch...

The most radical improvement I ever saw was on my Wby Mk V in .30-'06. Out of the box in 1970, it would not shoot tighter than a three-inch group. After my re-bedding, 3/4". No other changes. Before an antelope hunt last year, I got a 3-shot, 1-2" group [brag, brag, :-)]...

Best regards, good luck.
Art Eatman is offline  
Old December 6, 1998, 09:17 AM   #4
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
Art,
Thanks for the wax paper tip. I hadn't heard that one before.
fal308 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04264 seconds with 7 queries