The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Reply
 
Thread Tools Search this Thread
Old January 16, 2019, 11:56 AM   #26
Glenn E. Meyer
Staff
 
Join Date: November 17, 2000
Posts: 19,864
It is a pain when you get up to the line in a match and your optic won't come on as the batteries are dead. That's why we preload folks under supervision and test the optics.

In a SD situation, that would be annoying. Good idea to trade out batteries like you do on a smoke detector. I also do that with flashlight batteries. I take the old ones and keep them for cheap utility lights and gadgets around the house.

I have a set of batteries for all my gadgets in my range back and in the car's emergency junk.
__________________
NRA, TSRA, IDPA, NTI, Polite Soc. - Aux Armes, Citoyens
Glenn E. Meyer is offline  
Old January 16, 2019, 12:16 PM   #27
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 6,173
Hopefully,we all get a little creative cranial flatulence once in a while.
Then maybe we filter it through feasibility,etc.


I'm not interested in kicking the slats out of OP's ideas,


The old GyroJet was not electric ignition,but it had a reasonably similar layout to the OP's gun. The ammo was a rocket with helical jets for spin.It had a primer in the base,like a conventional handgun round.

It was magazine fed,like a conventional semi auto. There was a fixed firing pin in the breech face.


There is a hammer that whacks the projectile on the nose,driving it onto the firing pin.The hammer is recocked as the rocket runs over it.


The "barrel" is just a launch tube,that does not contain any pressure.


It was a flop,for a number of reasons.But it did create a stir.
HiBC is offline  
Old January 16, 2019, 12:45 PM   #28
DPris
Senior Member
 
Join Date: August 19, 2004
Posts: 7,133
Not trying to do any slat kicking, just advising OP that there's no commercial viability in the concept detailed here.

If he was doing his experimentation with that end in view, best to realize that up front before committing serious time and/or money into the project.

If just playing around for personal fun, by all means pursue as long as the mood motivates.
Denis
DPris is offline  
Old January 16, 2019, 03:52 PM   #29
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 6,173
I spent most of my 30 years as a machinist working in the R+D "Model Shop" developing new products.
Often I worked off crayon and napkin sketches creating from scratch whatever the engineers dreamed up.
I've done the same supporting a University Engineering research center.
I've also listened to a lot of folks tell me what I need to do for them is make this simple little job,you just...…


Creative cranial flatulence is really easy.Its often easiest in bed,in the space between waking and dreaming.

I don't mean to be harsh,but its castles in the air.

You can draw a magnetic breech plug that will pull a steel cartridge from muzzle to breech. Easy.

But if you can't find the energy or creativity to set a steel 1/4-20 nut on a table and see if bore diameter neomidium magnet will even pick up the nut from 6 inches above....something is missing.


Dpris,I agree. Another critical component is identifying or creating a customer need. To be successful,you need a market.
HiBC is offline  
Old January 16, 2019, 04:08 PM   #30
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 14,943
Electricity by itself won't set off powder. You have to have heat and have it instantly.
Hawg is offline  
Old January 16, 2019, 04:17 PM   #31
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 6,173
You recon a chunk of flint rock in a hammer whacking steel might make some hot sparks without them batteries Hawg?

I suppose if you had no cartridge case,you wouldn't have to eject.....HMMMM

We might be on to something here.
HiBC is offline  
Old January 18, 2019, 08:00 PM   #32
Drm50
Senior Member
 
Join Date: November 10, 2014
Posts: 734
Some guys get off building 12g rifles, others putting together a BP kit rifle. If guy wants to
fool around with electric ignition, why not. I see many guns today new in shops that have no practical value or of so low in quality they aren't worth having.
Drm50 is offline  
Old January 26, 2019, 07:10 AM   #33
darkgael
Senior Member
 
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,060
A bit of a drift from the main idea:
Quote:
Maybe you can find the old movie "Carbine Williams".Its a real story about a man in prison to took an axle and a fencepost and crafted a working model of a short stroke gas operated carbine that evolved into the M-1 Carbine.
Not quite accurate....too much Hollywood. Williams was a talented man for sure and did invent the Short stroke piston which was used in Winchester's M2/M1 carbine designs. The guns he made in prison are in a museum in NC.The bulk of the design for the M1 Carbine was done by others.
https://www.americanrifleman.org/art...-myth-reality/
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ...
NRA Life Member

Last edited by darkgael; January 26, 2019 at 08:05 AM.
darkgael is offline  
Old January 26, 2019, 08:45 AM   #34
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 15,353
I had an old Gun Digest with an article on building a muzzleloader to be fired by a model airplane glow plug. Sorry, I no longer have the issue and don't recall details (if given) about lock time and fouling of the element.
Jim Watson is online now  
Old January 27, 2019, 12:48 AM   #35
Andy Blozinski
Senior Member
 
Join Date: August 31, 2013
Posts: 511
You guys never thought of putting a fresh $2 battery in for every major adventure...among all the other involved costs that make spending $2 seem pretty silly?
Andy Blozinski is offline  
Old January 27, 2019, 01:30 AM   #36
DPris
Senior Member
 
Join Date: August 19, 2004
Posts: 7,133
Electronics, including batteries, are vulnerable to cold.
Rain doesn't help, either.
Denis
DPris is offline  
Old January 27, 2019, 01:37 AM   #37
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 7,685
Been done here too. I have to admit I forgot about the Metal Storm.
https://m.youtube.com/watch?v=oWEqyrKLz6M
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old February 7, 2019, 07:14 PM   #38
labnoti
Member
 
Join Date: April 2, 2018
Posts: 71
If this is for personal experimentation purposes, try using Estes model rocket ignitors. They are used with batteries to ignite black powder rocket motors all the time. They would easily ignite a charge in a muzzleloader type firearm.

For commercial applications, electronic ignition is almost certainly the future -- but it's not here yet. Yes, electric ignitors have been done in the past, but it wouldn't be the first time an invention was "ahead of its time."

There is nothing wrong with the reliability of batteries. They're chemical devices that are no less inherently reliable than primers or the metal springs that we depend on today. With N+1, it's easy to have redundancy as well. Batteries and electronics are easily waterproofed and they work in cold environments like outer space all the time.

The chief reason electronic ignition is superior to the moustraps we have today is because ignition can be initiated without any mechanical demand. The trigger pull weight, pull length, take-up, smoothness, gritiness, wall, feel, stacking, and the location of the trigger relative to the bore center all contribute substantially to the gun's shootability. That's the reason we have so many types of "actions." Everyone is trying to invent a better mousetrap. With electronic ignition, the trigger is mechanically disconnected from the mechanism that fires the gun. It's fly by wire. It does not have to cock the striker or mainspring. It could be better than the best single-action trigger we have now, and yet it wouldn't require pre-cocking the hammer or manipulating the safety. Why not?

That brings us to the second advantage: electronic control of ignition means computer control. If it's not your finger on the trigger, but clothing or a piece of the holster, no fire. If it's someone else's finger, no fire. Of course this could also mean that if GPS indicates you're in a "gun free zone," it could be remotely disabled. There's lots of other implications to remote control, but I won't get into all of them because they're all hypothetical "what ifs." But how about this one: Your eye focuses on a target. You move the gun up and press the fire button. When the bore is aligned to the target your eye is looking at, then the gun fires. You could adjust it to 1 MOA to hit bullseyes at long range, or to fire when anywhere within 80 MOA for the fastest shot on a man-size target at 7 yards.

Last edited by labnoti; February 7, 2019 at 07:24 PM.
labnoti is offline  
Old February 7, 2019, 10:32 PM   #39
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 9,818
Daisy ignited powder charges with compressed air almost 50 years ago.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old February 15, 2019, 05:58 AM   #40
silvermane_1
Senior Member
 
Join Date: November 6, 2011
Location: Burien,WA
Posts: 595
Well what about electric/electronic actuated/activated firing pin?
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE
9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c
silvermane_1 is offline  
Old February 15, 2019, 11:05 PM   #41
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 9,818
Done 50 years ago, too.
Solenoid operated triggers were all the rage.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old February 15, 2019, 11:57 PM   #42
TXAZ
Senior Member
 
Join Date: September 5, 2010
Location: McMurdo Sound Texas
Posts: 3,566
I believe MetalStorm uses electrical ignition to fire 1 or 1,000,000 bullets in 1 second, with a host of patents.
__________________
!أنا لست إرهابياً
TXAZ is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09881 seconds with 8 queries