The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Thread Tools Search this Thread
Old August 19, 2008, 08:20 PM   #1
Join Date: February 18, 2002
Posts: 31
Found an old one

I friend of mine found an revolver hidden in the barn on the farm that his family has owned for 55 years It was wrapped in a rag and stuffed between some beams.There is a "release" in back of the trigger ,when it is pushed you can move trigger to firing position. There is no trigger guard or serial number.On the frame in front of the cylinder is an oval.In it are the letters GM and the outline of a horse.Front of frame has the number 3 on it. Grips seem to be plastic.It loads thru a gate on right sideand is .32 cal. Any Ideas???
Tacp is offline  
Old August 19, 2008, 10:22 PM   #2
James K
Senior Member
Join Date: March 17, 1999
Posts: 24,383
Would it be possible to post a couple of pictures? That isn't enough info to identify it, if it can be identified.

Jim K
James K is offline  
Old August 20, 2008, 08:15 PM   #3
Join Date: February 18, 2002
Posts: 31
Will get some to post.
Tacp is offline  
Old August 23, 2008, 02:30 PM   #4
Join Date: August 6, 2008
Location: Somewhere near Buffalo, NY
Posts: 98
Sounds like one of those moonshiner hideaway guns........
Annoy a Liberal - Work, succeed, and be happy!!!

Join The NRA and protect you're rights!
Perajio is offline  
Old August 23, 2008, 03:39 PM   #5
Brian Pfleuger
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,429
Grips seem to be plastic.

Can't be any older than 1950's or so, right? If the plastic grips are original.
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
Old August 23, 2008, 05:28 PM   #6
David the Gnome
Senior Member
Join Date: July 5, 2007
Location: Lexington, KY
Posts: 3,092
They could be bakelite and not plastic. I have guns from the early 30's with bakelite grips.
Si vis pacem, para bellum.
David the Gnome is offline  
Old August 24, 2008, 12:42 PM   #7
Old Gaffer
Senior Member
Join Date: December 20, 2006
Location: Ft. Washington, MD
Posts: 288
Could this be Rohm pistol (note, please, that I use the words "Rohm" and "pistol" in the same sentence cautiously).

The GM is sometimes used in place of the German "GMBH", which is their equivalent of our "Corp".

If this is in fact a Rohm firearm I suggest wrapping it back up and sticking it back in the rafters - that's the safest place for it.

A friend of mine has a RG-10 (.22 short revolver) that I cleaned and test fired for her. It shoots about a foot high at ten feet

All the best,
Old Gaffer is offline  
Old August 24, 2008, 04:24 PM   #8
Senior Member
Join Date: June 23, 2004
Location: Ohio
Posts: 5,674
Hard rubber grips may look like plastic but may date the revolver as quite old. Yes, get a good photo of it so we can really make a decision. Don't get any wild ideas about firing it just yet!
Your gun is like your nose, it is just wrong for someone else to pick it for you!
Tom2 is offline  
Old August 24, 2008, 08:03 PM   #9
Senior Member
Join Date: August 20, 2004
Location: Evanston,WY
Posts: 898
Dont know if it was ever real commonly used for handgun grips, but polished bone can look and feel a lot like plasitc too, from what I've seen. Just a thought.

Also, why do I never find any old guns? seems like every month, someone on here or THR is posting about some neat gun they found somewhere. All I ever find in the dirt, or in the attic, or in rafters is bugs......

Regardless, +1 more on pics, I love old stuff, and found, free old stuff is my very favorite kind.
Q: How can I reduce the amount of mail I receive from the NRA?
A: Simply email us at [email protected] or dial 800-NRA-3888 and request to be placed on the "Do Not Promote" list.
jrfoxx is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06629 seconds with 8 queries