|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 6, 2018, 06:50 PM | #26 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
Quote:
When I reached for the magnet to try ... 10(?) years ago ... I wanted to avoid having the primer catch rubbing/dragging on the ram. Having a background in helicopter maintenance, I'm really anal about chaffing, rubbing, galling, dragging, etc. So, even when it doesn't really matter, I still avoid it. Putting the magnet in the tray accomplished that, and is still somewhat adjustable for stand-off from the ram, so I never had to go further. I think your solution is the better option for nearly every other RC IV owner. --- ninosdemente, I printed one of the left-exit versions of the primer catch I linked in my last post. (Well, three, actually, but the first two were early failures. I was shooting from the hip and needed a couple sighting shots, so to speak.) It was definitely designed for SLA printing, not FDM, but I managed to get my support settings good enough for easy release. Even so, it's a well designed part. The fit is good, and the dimensions good enough that any deviation on my machine can be attributed to the tolerances of my printer and my press. (Edit: I just rechecked the thingiverse listing. The original part was printed in metal on a Formiga P 110, which is an SLS [selective laser sintering] machine that starts at $175,000. ) There's a small booger on the round 'chute' portion for some reason, but it would be easy to trim off. It really doesn't show in the photos. (Sorry. Black part. Crappy lighting. And a cell phone camera that always screws up light balance [which can't be overridden].) Looks like a G-code issue to me, not a printer error or bad settings. The catcher holds itself in place well with a light friction-fit. Adding the prescribed 6mm magnets would probably negate any need to secure it further - such as with rubber bands, as I mentioned previously. I think I like it. I'll track down some tubing next time I'm at a hardware store, and see if this will become a permanent fixture. The exit chute external diameter is .580-.590". What's better for you? Left or right exit? I've got a right exit on the printer right now. (4h15m print time) If you want a really nice, smooth, high quality print, order one. If you don't mind what you see here, send me a PM. I love, and hate, how flash photography brings out details like surface rust that you can never see with the naked eye. I didn't know my ram was rusty!
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
September 6, 2018, 08:09 PM | #27 |
Senior Member
Join Date: March 23, 2017
Location: Northwest Indiana
Posts: 831
|
Nice! No worries on the pictures... I cleaned mine a bit when I took pictures of it. Lol. The set up looks nice.
The right seems the better option for me. Looks are the least of the worries... Just as long as it functions. Very expensive machine. |
September 10, 2018, 09:44 AM | #28 |
Senior Member
Join Date: March 1, 2009
Posts: 4,232
|
Just a quick update
Deprimed 100 .223 and 25 .260 cartridges yesterday on my Rockchucker Supreme with 100% going into the catcher using the magnet trick. Looks like the Lee is back to range loading sessions only
__________________
“How do I get to the next level?” Well, you get to the next level by being the first one on the range and the last one to leave.” – Jerry Miculek |
September 11, 2018, 10:16 PM | #29 |
Senior Member
Join Date: March 23, 2017
Location: Northwest Indiana
Posts: 831
|
Hounddawg, good it worked out for you. I know it can be annoying at least for me as well when most didn't fall where they were suppose to.
|
September 13, 2018, 09:37 PM | #30 |
Senior Member
Join Date: March 23, 2017
Location: Northwest Indiana
Posts: 831
|
Update:
Thanks to FrankenMauser now I don't have to worry about primers on the floor or emptying the tray constantly . http://www.mentegraphics.com/pictures/85.jpg http://www.mentegraphics.com/pictures/86.jpg http://www.mentegraphics.com/pictures/87.jpg http://www.mentegraphics.com/pictures/88.jpg http://www.mentegraphics.com/pictures/89.jpg I have not fully tested it...but was able to find some primers on the floor and works great. A few minor adjustments to the tub for the primer to slide down to the container and voila! Tubing was found at Menards. Had difficulties with the magnets. So I tried without the magnets and so far holding. |
|
|