|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 6, 2017, 07:50 PM | #51 |
Senior Member
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
|
Maybe consider smoking your mold with a candle before pouring it.
Never skim a furnace's surface to cast with.. Always bottom pour or dip melted lead from below the surface. Old casters Tip: If not wanting to see a chunky dross surface while pouring. Lightly sprinkle Boric Acid Crystals on top of a freshly fluxed lead's surface. If the Boric Acid glass like surface tension isn't broken during the pour. You'll have a no separation of tin >top Rim to pots Empty. i.e. pile junk bullets and sprew's off to the side till the pot's material is used up so to not break the dross surface tension. |
December 6, 2017, 11:20 PM | #52 |
Senior Member
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 822
|
Yes i flux when i make my alloy.
So i flux that old water pipe before i add my alloy. Then pour into 1 lb bars. I usually do no more then 40lbs at a run. I am down to 27 lbs on this last alloy i made... will cast with it till its out. Might just throw it out when i get towards the bottom of the pot since it has contaminates in it that i just cant get out |
December 6, 2017, 11:21 PM | #53 |
Senior Member
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 822
|
Where can i find boric acit crystals at Mr.Magoo
|
December 7, 2017, 08:51 AM | #54 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
You can get boric acid at Walgreens, Rite Aid, CVC etc, etc.
__________________
Sent from my Tandy 1000 |
December 7, 2017, 10:02 AM | #55 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
Probably be in the vitamins/health care section.
__________________
Just shoot the damn thing. |
December 8, 2017, 02:20 PM | #56 |
Senior Member
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 822
|
Cool... i will be making up new alloy this weekend. I will grab some.
I will be using lino i got in 5 lb bars from roto metals with lead... Will heavily flux my lead befor adding lino. Whats a good ratio of lino to lead to gwt a bhn of 12 or 13 ? |
December 8, 2017, 06:03 PM | #57 | |
Senior Member
Join Date: November 14, 2017
Location: Finger Lakes Region of NY
Posts: 1,442
|
Quote:
Don
__________________
NRA Life Member NRA Certified Metallic Cartridge Reloading Instructor |
|
|
|