December 22, 2018, 09:15 PM | #1 |
Senior Member
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
|
PT&G receiver experience
I was searching for receivers and pricing out blue printed Remingtons against Sturgon etc.. and came across Pacific Tool and Gsuge receivers. They are priced a bit more then Remingtons but significantly less then the high end name brands.. I haven't found any reviews on them.
Anyone ever use one of these? http://pacifictoolandgauge.com/actio...bolt-face.html I have one of their DBM conversions for a Ruger 77 MKIi and it is well made. |
December 24, 2018, 07:00 AM | #2 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
While not a receiver, i've gotten several of their Savage bolt faces, and reamers from them.
Thus far have been very pleased with the quality of their products. Note, while being more expensive than a Rem receiver they are inline pricewise with a Savage target action.
__________________
When our own government declares itself as "tyrannical", where does that leave us??!! "Januarary 6th insurrection". Funny, I didn't see a single piece of rope... |
December 24, 2018, 10:57 AM | #3 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,582
|
I have actually handled a short action built by PTG and it was nice to say the least.
I have also, on my Creedmoor build installed a 3 position safety shroud, and it is very cool, I will buy more stuff from PTG in the future.
__________________
Keep your Axe sharp and your powder dry. |
December 24, 2018, 11:35 AM | #4 |
Senior Member
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
|
They sell still actions w ptg bolts for not much more as well.
|
December 24, 2018, 12:49 PM | #5 |
Senior Member
Join Date: June 14, 2018
Posts: 619
|
PTG is my go to for all my precision rifle tools. I don't have one of their receivers but I use their tooling to blue print with. If they are doing their 700's in house then they are most likely perfect. Caveat: You should call them to find out if your current barrel will still be head spaced correctly and ask for advice if you're not already skilled in doing this.
|
December 24, 2018, 01:52 PM | #6 |
Senior Member
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
|
Thanks. I wont be doing this myself. Will be sending it out.
|
December 24, 2018, 04:24 PM | #7 |
Senior Member
Join Date: November 26, 2016
Location: Minnesota
Posts: 959
|
I have one of their bolts in my latest build. It's excellent. Smooth like a bank vault door and strong too. One piece of high quality steel. No soldered on bolt handles here.
I am sure their actions are impeccable. |
Thread Tools | Search this Thread |
|
|