The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old August 13, 2019, 12:47 PM   #1
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 2,417
My P64 broke

I have two Radom P-64s, and the safety catch stopped working on one of them. I noticed the dreaded broken hammer catch, that is keeping me from moving the safety, but the gun still fires. It broke while the safety was off, but it's still keeping the firing pin contained so the gun will still fire. I'm sure it won't last much longer, and the safety/hammer catch has historically been a hard item to find. Anyone have leads on replacements?
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Old August 13, 2019, 01:12 PM   #2
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS
Posts: 6,984
If I remember right, one of the big P-64 importers (maybe Tennessee Gun) used to have bunches of guns that weren't good enough to sell whole so they kept them for parts. However, I seem to recall Tennessee Gun getting shut down so I don't know what happened to all those spare parts. Maybe someone else bought them up.
Doyle is offline  
Old August 13, 2019, 01:20 PM   #3
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS
Posts: 6,984
I don't have a P-64 anymore, but this site used to keep a good supply of parts.
https://www.robertrtg.com/store/pc/P64-c202.htm
Doyle is offline  
Old August 14, 2019, 07:16 AM   #4
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 2,417
Yeah I'm a frequent visitor of robertrtg.com. They have some parts but not the hammer catch. Might have to find a source in Poland.
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Old August 19, 2019, 06:28 AM   #5
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 2,417
New safety lever coming to me from Poland. Ain't cheap, but it'll work.
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Old August 19, 2019, 08:50 PM   #6
RayVa
Junior Member
 
Join Date: January 10, 2019
Location: Northern VA
Posts: 2
Share Info

I am a P64 owner also so if you would share information on where you are getting your parts from it would be appreciated.
RayVa is offline  
Old August 19, 2019, 11:45 PM   #7
Nodak1858
Senior Member
 
Join Date: September 7, 2009
Location: N. Dakota
Posts: 197
Second that, safeties are usually tough to come by. Like to pick up a trigger bar.
__________________
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.
Nodak1858 is offline  
Old August 20, 2019, 09:43 AM   #8
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 2,417
It's an ebay auction with multiple safeties for sale. Fellow in Poland posts parts on eBay now and then.

https://www.ebay.com/itm/P64-CZAK-PO...EAAOSw9bFcriF1http://https://www.ebay.com/itm/P64-...EAAOSw9bFcriF1
__________________
Liberty and freedom often offends those who understand neither.

Last edited by noelf2; August 20, 2019 at 09:49 AM.
noelf2 is offline  
Old August 20, 2019, 01:53 PM   #9
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 20,451
May have to have one made.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old August 21, 2019, 10:09 AM   #10
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 2,417
Quote:
May have to have one made.
There are plenty of them made, they're just all in Poland... ... It's probably against ebay policy, but I think I'll message the seller and see if I can get bulk parts cheaper, and he'll avoid ebay and paypal fees...
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05785 seconds with 10 queries